feat(extensions/pi): ship pi-env.zsh shell loader

The loader that sources ~/.config/pi/.env into every shell was only
living in the myconfigs tor-ms22 backup \u2014 a fresh machine had nowhere
to get it from except copying by hand. Now canonical here.

- extensions/pi/pi-env.zsh: 20-line POSIX-compatible loader
  (set -a; source ~/.config/pi/.env; set +a). Works in bash and zsh.
- install.sh install_pi_env_loader:
  * oh-my-zsh detected (~/.oh-my-zsh/custom/ exists)
    \u2192 cp into that dir (NOT symlink \u2014 that dir is typically part of
      a dotfiles backup, and a symlink to mempalace-toolkit would
      break when restored on another host).
    \u2192 Idempotent: if target content matches repo, says 'already
      installed'. If it differs, leaves user edits alone and points
      at diff for manual reconcile.
  * No oh-my-zsh \u2192 prints source-this-line snippet for ~/.zshrc or
    ~/.bashrc (derived from $SHELL). Does NOT auto-edit rc files.
- install.sh uninstall: only removes the copy if content still matches
  repo. Local edits preserved.
- Docs:
  * extensions/pi/README.md Environment setup section rewritten with
    both install paths, step 5 of deploy recipe updated.
  * AGENTS.md Structure block lists pi-env.zsh.
  * Root README repo-contents line mentions it.

Verified on tor-ms22: install fresh \u2192 uninstall (content match \u2192 remove)
\u2192 reinstall \u2192 zsh -ic loads AWS vars correctly. Also tested bash fallback
path via HOME=/tmp/fake-home SHELL=/bin/bash \u2014 prints right .bashrc snippet.

AGENTS.md

@@ -22,6 +22,7 @@ extensions/
   pi/                   # pi coding-agent bring-up: MCP bridge, keybindings, settings template
     mempalace.ts        # Symlinked into ~/.pi/agent/extensions/ (MCP <→ pi glue)
     keybindings.json    # Symlinked into ~/.pi/agent/ (mosh/tmux newline fix)
+    pi-env.zsh          # Copied into ~/.oh-my-zsh/custom/ or sourced from .bashrc (loads ~/.config/pi/.env)
     settings.example.json # Template; user copies + edits (pi rewrites settings.json at runtime)
     README.md           # Extension internals, schema-passthrough gotcha, env setup
 ```

README.md

@@ -8,7 +8,7 @@ Producer-side tooling for [MemPalace](https://github.com/MemPalace/mempalace)
 - `bin/mempalace-docs` — mines project directories into MemPalace while excluding source code, keeping the palace signal-dense.
 - [`ARCHITECTURE.md`](ARCHITECTURE.md) — **canonical spec**: architecture diagram, component details, setup recipe, operational notes, upstream-retirement roadmap.
 - [`SKILL.md`](SKILL.md) — the companion agent skill, symlinked into `~/.agents/skills/opencode-mempalace-bridge/` on install.
-- [`extensions/pi/`](extensions/pi/) — pi coding-agent bridge: the MemPalace MCP extension (symlinked), a mosh/tmux-friendly keybindings file (symlinked), and a `settings.example.json` template for starting pi without `--model`. `install.sh` also probes for `AWS_PROFILE`/`AWS_REGION` (needed by pi's Bedrock provider) and points at the recommended `~/.config/pi/.env` layout if missing.
+- [`extensions/pi/`](extensions/pi/) — pi coding-agent bridge: the MemPalace MCP extension (symlinked), a mosh/tmux-friendly keybindings file (symlinked), a `pi-env.zsh` shell loader (copied into `~/.oh-my-zsh/custom/` on zsh+omz hosts, or source'd from `.bashrc` / `.zshrc` otherwise), and a `settings.example.json` template for starting pi without `--model`. `install.sh` also probes for `AWS_PROFILE`/`AWS_REGION` (needed by pi's Bedrock provider) and points at the recommended `~/.config/pi/.env` layout if missing.
 
 **If you're just trying to get this working on a new machine → jump to [Setup](#setup).**
 **If you want the full architecture story → read [`ARCHITECTURE.md`](ARCHITECTURE.md).**

extensions/pi/README.md

@@ -97,17 +97,22 @@ Run `pi --list-models` to confirm what your credentials can actually invoke.
 
 ### 5. Ensure AWS env vars are live in your shell
 
-If you provisioned via step 1, `~/.config/pi/.env` exists and
-`~/.oh-my-zsh/custom/pi-env.zsh` sources it on every new shell. Verify:
+**On zsh + oh-my-zsh hosts:** step 3's `install.sh` already copied
+`pi-env.zsh` into `~/.oh-my-zsh/custom/`, so every new shell sources
+`~/.config/pi/.env` automatically. Verify:
 
 ```bash
 exec zsh
 echo "$AWS_PROFILE  $AWS_REGION"   # should print your values
 ```
 
-If empty, check that `~/.config/pi/.env` decrypted (`head ~/.config/pi/.env`
-should show plain text, not binary). `git-crypt unlock` in step 1 is the
-usual culprit when this is empty.
+**On bash or plain zsh (no oh-my-zsh):** `install.sh` printed a
+`source <repo>/extensions/pi/pi-env.zsh` snippet — add that one line to
+`~/.bashrc` or `~/.zshrc`, open a fresh shell, verify as above.
+
+If vars are empty, check that `~/.config/pi/.env` decrypted
+(`head ~/.config/pi/.env` should show plain text, not binary).
+`git-crypt unlock` in step 1 is the usual culprit when this is empty.
 
 ### 6. Register mempalace MCP with opencode (if using opencode too)
 
@@ -259,9 +264,26 @@ layout (matches the tor-ms22 dotfiles pattern):
 ```
 ~/.config/pi/.env               ← AWS_PROFILE=..., AWS_REGION=...
                                   (git-crypt encrypted in dotfiles repo)
-~/.oh-my-zsh/custom/pi-env.zsh  ← set -a; source ~/.config/pi/.env; set +a
+~/.oh-my-zsh/custom/pi-env.zsh  ← installed by mempalace-toolkit install.sh
+                                  (sources the .env into every shell)
 ```
 
+The loader file `pi-env.zsh` is canonical here in `extensions/pi/` and
+installed by `install.sh` in one of two ways:
+
+| Detected | Action |
+|---|---|
+| `~/.oh-my-zsh/custom/` exists | `cp` (not symlink) into that directory — auto-loaded by omz on every new shell. cp not symlink because that directory is part of the dotfiles backup, and a symlink into mempalace-toolkit would break when the backup is restored on another host. |
+| No oh-my-zsh | Prints a shell-specific `source <repo>/extensions/pi/pi-env.zsh` snippet for `~/.zshrc` or `~/.bashrc`. Installer does not auto-edit rc files. |
+
+The loader itself is POSIX-compatible (`set -a` / `source` / `set +a`),
+so bash users can source it directly — no zsh dependency in the file.
+
+Re-runs are idempotent: if the installed copy matches the repo, prints
+"already installed". If it differs, leaves your edits alone and points
+at `diff` for comparison. Uninstall only removes the file if it still
+matches the repo copy; local edits are preserved.
+
 Historical note: these vars used to live under a `# Environment variables
 for pi` block inside `~/.config/opencode/.env`. Split out 2026-05-05 so
 each tool owns its own env file. `install.sh` runs a `check_aws_env`
@@ -276,6 +298,7 @@ mempalace-toolkit/
         ├── README.md               ← this file
         ├── mempalace.ts            ← symlinked into ~/.pi/agent/extensions/
         ├── keybindings.json        ← symlinked into ~/.pi/agent/
+        ├── pi-env.zsh              ← cp'd into ~/.oh-my-zsh/custom/ (or source'd manually for bash)
         └── settings.example.json   ← template; copy + edit into ~/.pi/agent/
 ```
 

extensions/pi/pi-env.zsh

@@ -0,0 +1,28 @@
+# Load pi coding-agent environment variables from ~/.config/pi/.env
+#
+# Canonical source: mempalace-toolkit/extensions/pi/pi-env.zsh
+# Installed by mempalace-toolkit/install.sh via `cp` (not symlink) to keep
+# ~/.oh-my-zsh/custom/ portable across machines with different $HOME paths.
+# See extensions/pi/README.md#environment-setup for the full story.
+#
+# Sources ~/.config/pi/.env (AWS_PROFILE, AWS_REGION, and any future
+# pi-scoped secrets) so pi's Bedrock provider works when spawned from any
+# shell. The .env file itself is shipped (git-crypt encrypted) from the
+# myconfigs dotfiles repo.
+#
+# `set -a` auto-exports every assignment in the sourced file, so plain
+# KEY=VALUE lines become exported env vars without needing `export` in .env.
+# Also works in bash (set -a and source are POSIX) — non-oh-my-zsh users
+# can source this file directly from ~/.bashrc or ~/.zshrc instead.
+#
+# Historical note: these vars used to live in ~/.config/opencode/.env
+# under a "# Environment variables for pi" block. Split out 2026-05-05
+# so each tool owns its own env file.
+
+_pi_env="${HOME}/.config/pi/.env"
+if [[ -r "${_pi_env}" ]]; then
+  set -a
+  source "${_pi_env}"
+  set +a
+fi
+unset _pi_env

install.sh

@@ -29,6 +29,10 @@ PI_KEYS_DEST="${HOME}/.pi/agent/keybindings.json"
 PI_SETTINGS_EXAMPLE="${SCRIPT_DIR}/extensions/pi/settings.example.json"
 PI_SETTINGS_DEST="${HOME}/.pi/agent/settings.json"
 
+# pi env loader (shell glue that sources ~/.config/pi/.env into every shell)
+PI_ENV_SRC="${SCRIPT_DIR}/extensions/pi/pi-env.zsh"
+PI_ENV_OMZ_DEST="${HOME}/.oh-my-zsh/custom/pi-env.zsh"
+
 # ── args ─────────────────────────────────────────────
 ACTION="install"
 ASSUME_YES="no"
@@ -58,6 +62,14 @@ What install does:
   - If pi exists, warns if ~/.pi/agent/settings.json is missing and points
     at extensions/pi/settings.example.json as a template (NOT symlinked —
     pi rewrites this file at runtime).
+  - If oh-my-zsh is detected (~/.oh-my-zsh/custom/ exists), copies
+    extensions/pi/pi-env.zsh into ~/.oh-my-zsh/custom/pi-env.zsh so every
+    new zsh shell sources ~/.config/pi/.env. Uses cp (not symlink) because
+    that dir gets backed up by rsync_copy and symlinks would break
+    portability. Re-runs are idempotent when content matches the repo;
+    warns and leaves local edits alone if they differ.
+  - If oh-my-zsh is NOT detected, prints a shell-specific source snippet
+    for ~/.zshrc or ~/.bashrc. Does not auto-edit rc files.
   - Warns if AWS_PROFILE / AWS_REGION are unset (only relevant to users
     whose pi settings.json selects amazon-bedrock as defaultProvider).
   - Drops a .skill-source marker in the skill dir so sibling tooling
@@ -292,6 +304,56 @@ install_pi_keybindings() {
     ok "Linked keybindings.json → $PI_KEYS_SRC"
 }
 
+install_pi_env_loader() {
+    # Ship pi-env.zsh (sources ~/.config/pi/.env so AWS vars etc. are in
+    # every shell that starts pi). Two paths depending on shell setup:
+    #
+    # 1. oh-my-zsh present → cp into ~/.oh-my-zsh/custom/ (auto-loaded by
+    #    omz). cp not symlink because that directory is typically part of
+    #    a dotfiles backup (rsync_copy.sh in the myconfigs repo) and a
+    #    symlink into mempalace-toolkit would break when restored on
+    #    another host.
+    # 2. No oh-my-zsh → print a source snippet for ~/.zshrc or ~/.bashrc.
+    #    We don't auto-edit rc files — too invasive for an optional glue
+    #    file. The loader itself is POSIX-compatible (set -a / source /
+    #    set +a), so bash users can source it directly.
+
+    [[ -d "$PI_EXT_DEST_DIR" ]] || return 0   # no pi → skip
+
+    if [[ -d "$HOME/.oh-my-zsh/custom" ]]; then
+        note "Installing pi-env.zsh into ~/.oh-my-zsh/custom/"
+        if [[ -f "$PI_ENV_OMZ_DEST" ]]; then
+            if cmp -s "$PI_ENV_SRC" "$PI_ENV_OMZ_DEST"; then
+                ok "pi-env.zsh already installed (content matches repo)"
+                return 0
+            fi
+            warn "$PI_ENV_OMZ_DEST exists and differs from repo copy"
+            printf '       Leaving your edits alone. Compare with:\n'
+            printf '           diff %q %q\n' "$PI_ENV_OMZ_DEST" "$PI_ENV_SRC"
+            printf '       To adopt the repo version: rm that file and re-run install.sh\n'
+            return 0
+        fi
+        cp "$PI_ENV_SRC" "$PI_ENV_OMZ_DEST"
+        ok "Copied pi-env.zsh → $PI_ENV_OMZ_DEST"
+        printf '       Open a new shell (or `exec zsh`) to load AWS_PROFILE / AWS_REGION.\n'
+        return 0
+    fi
+
+    # No oh-my-zsh — print shell-specific snippet.
+    note "oh-my-zsh not detected — manual shell setup needed"
+    local shell_name
+    shell_name="$(basename "${SHELL:-bash}")"
+    local rc_file
+    case "$shell_name" in
+        zsh)  rc_file="~/.zshrc" ;;
+        bash) rc_file="~/.bashrc" ;;
+        *)    rc_file="~/.${shell_name}rc  # adjust for your shell" ;;
+    esac
+    printf '       Add this line to %s so every shell sources ~/.config/pi/.env:\n' "$rc_file"
+    printf '           source %q\n' "$PI_ENV_SRC"
+    printf '       (the loader itself is POSIX-compatible — works in bash and zsh.)\n'
+}
+
 # ── Verify ~/.pi/agent/settings.json exists ──────────────────────────
 # If pi is installed but settings.json is missing, `pi` refuses to start
 # without `--provider ... --model ...` on every invocation. The toolkit
@@ -370,6 +432,8 @@ do_install() {
     echo
     install_pi_keybindings
     echo
+    install_pi_env_loader
+    echo
     check_path
     echo
     check_wake_up_protocol
@@ -436,6 +500,19 @@ do_uninstall() {
         ok "No pi keybindings symlink to remove"
     fi
 
+    echo
+    note "Removing pi-env.zsh loader (oh-my-zsh path)"
+    # Only remove if content still matches the repo copy — user may have
+    # local edits we shouldn't silently discard.
+    if [[ -f "$PI_ENV_OMZ_DEST" ]] && cmp -s "$PI_ENV_SRC" "$PI_ENV_OMZ_DEST"; then
+        rm "$PI_ENV_OMZ_DEST"
+        ok "Removed $PI_ENV_OMZ_DEST"
+    elif [[ -f "$PI_ENV_OMZ_DEST" ]]; then
+        warn "$PI_ENV_OMZ_DEST differs from repo copy — left alone"
+    else
+        ok "No pi-env.zsh loader to remove"
+    fi
+
     # Remove the marker and the now-empty skill directory, but only if
     # the marker was written by us and the directory has nothing else in it.
     local marker="$SKILL_DEST_DIR/.skill-source"