Bump opencode 1.15.4 -> 1.15.6 + cut v1.15.6

Two upstream patch releases since v1.15.4b. Plus this release picks up
two workflow improvements that landed on main between v1.15.4b and
now (b6e4d89 pycache/DS_Store filter in base-decide, 90e5a1f doc-drift
sweep clause in AGENTS.md). No image-content changes beyond the
version bump; cache hit expected on base-35ee5fe7861a since neither
Dockerfile.base nor rootfs/ have changed.

The with-pi and omos-with-pi variants will also implicitly bump pi
0.75.3 -> 0.75.4 because PI_VERSION=latest resolves at build time.
The omos-with-pi smoke threshold (3700 MB after the v1.15.4b bump)
should accommodate two opencode patch versions plus one pi patch
without recurrence of the trip; a future bump-bump pattern would
push it again.

First release on the new CI path that exercises:
- pinned crane install (T14, v1.15.3) - only fires on real base rebuild,
  cache-hit on base means it stays unexercised this run too
- skip promote-base-latest on cache-hit (T15, v1.15.4) - active
- update-description always-and-success-of-base wrap (v1.15.4b) -
  active, will run since base variant publishes

.env.example

@@ -67,3 +67,32 @@ SSH_KEY_PATH=~/.ssh
 # OMOS_TMUX=false              # Enable tmux multiplexer integration
 # OMOS_SKILLS=true             # Install recommended skills (simplify, agent-browser, cartography)
 # OMOS_RESET=false             # Force regenerate oh-my-opencode-slim config on next start
+
+# ── pi coding-agent (alternative/complementary harness) ─────────────────
+# Requires image built with INSTALL_PI=true.
+# When the image is built with both INSTALL_OPENCODE=true (default) and
+# INSTALL_PI=true, both harnesses share the same mempalace install and
+# palace path — wing data is mutually visible to either harness.
+#
+# Pi version is baked at build time via PI_VERSION (default: latest at
+# build). The baked `pi` binary is at /usr/bin/pi (system npm prefix);
+# rebuild the image to upgrade it. NPM_CONFIG_PREFIX is set to
+# /home/developer/.pi/npm-global, so anything installed via
+# `pi install npm:...` or `npm install -g` as the developer user
+# (themes, skills, extensions, including a user-installed pi itself)
+# lands on the named volume and survives container recreate AND image
+# rebuilds. A user-installed pi wins via PATH order over the baked one.
+#
+# Pi config (settings.json, extensions toggle state, sessions, auth) persists in the
+# devbox-pi-config named volume mounted at ~/.pi/.
+#
+# To launch pi from a `compose run` invocation:
+#   docker compose run --rm devbox pi
+# To attach to a running container:
+#   docker compose exec -u developer devbox pi
+# Default `compose run` (no args) drops to bash; pick the harness yourself.
+#
+# Build args (set in docker-compose.yml or via --build-arg on docker build):
+#   INSTALL_PI=true              # default false; opt-in
+#   PI_VERSION=latest            # pin a specific version, e.g. 0.73.0
+#   INSTALL_OPENCODE=false       # build a pi-only image (still has Bun in -omos)

.gitea/README.md

@@ -0,0 +1,291 @@
+# CI / Build Pipeline
+
+This directory contains the gitea Actions workflows and the supporting
+documentation for opencode-devbox's CI. If you're investigating *why*
+the build pipeline is shaped the way it is, you're in the right place.
+
+## Workflows in this directory
+
+| File | Trigger | Role |
+|---|---|---|
+| [`workflows/docker-publish-split.yml`](workflows/docker-publish-split.yml) | `push: tags: v*` | **Production release pipeline.** Two-phase split-base build: shared `base-<hash>` published once (skipped on cache hit), then four parallel variant deltas. ~40–80 min wall clock depending on runner count and whether base needs rebuilding. |
+| [`workflows/validate.yml`](workflows/validate.yml) | `push: branches: main` + PR | **Lightweight gate.** amd64-only smoke test of all four variants + `DOCKER_HUB.md` sync check. ~30 min. Fires on every push to `main`. |
+
+## Why the split-base pipeline exists
+
+opencode-devbox publishes **four image variants** (`base`, `omos`, `with-pi`, `omos-with-pi`) × **two architectures** (amd64, arm64) = **eight image tags per release**. Today's runners are 2 self-hosted gitea Actions runners. arm64 builds are emulated under QEMU, which is the dominant cost (~3–5x slower than native).
+
+The four variants share ~95% of their layers (Debian + apt + Node + AWS CLI + mempalace + dev tools + entrypoints). The original `Dockerfile` was a single multi-stage build with `INSTALL_*` build-args gating variant-specific RUNs. BuildKit's per-layer cache key is content-addressed, but as soon as a build-arg-gated `RUN` produces a different layer hash for variant A vs variant B, every subsequent layer also has a different parent → identical commands re-execute per variant. Result: minimal cross-variant cache reuse on a fresh build.
+
+Two improvements were considered:
+
+1. **Reorder the original Dockerfile** so all variant-gated RUNs land at the bottom — modest gain, ~10–20% wall-clock reduction. *Not pursued.*
+2. **Split into `Dockerfile.base` + `Dockerfile.variant`** with the base published as a long-lived shared image — significant gain, ~50–70% wall-clock reduction with hash-driven cache reuse. *Pursued.*
+
+The split-base architecture is what the `docker-publish-split.yml` workflow exercises.
+
+## How the split-base pipeline works
+
+```
+                       ┌──────────────────┐
+                       │  base-decide     │   compute base-<hash>;
+                       │                  │   probe Docker Hub.
+                       │  hash inputs:    │
+                       │   Dockerfile.base│
+                       │   rootfs/        │
+                       │   entrypoint*.sh │
+                       └────────┬─────────┘
+                                │
+                  ┌─────────────┴─────────────┐
+                  │ need_build = true?        │
+                  └─────────────┬─────────────┘
+                       yes      │       no
+                                ▼
+                       ┌──────────────────┐
+                       │  build-base      │   multi-arch build,
+                       │                  │   push base-<hash>
+                       └────────┬─────────┘   to Docker Hub.
+                                │
+        ┌───────────────────────┼───────────────────────┐
+        ▼                       ▼                       ▼
+   ┌──────────┐            ┌──────────┐         ┌──────────────┐
+   │smoke-base│            │smoke-omos│   ...   │smoke-omos-pi │   amd64 only,
+   └────┬─────┘            └────┬─────┘         └──────┬───────┘   parallel.
+        │                       │                      │
+        ▼                       ▼                      ▼
+   ┌──────────┐            ┌──────────┐         ┌──────────────┐
+   │build-    │            │build-    │         │build-        │   multi-arch,
+   │variant-  │            │variant-  │   ...   │variant-      │   parallel,
+   │base      │            │omos      │         │omos-with-pi  │   tag push.
+   └────┬─────┘            └────┬─────┘         └──────┬───────┘
+        └───────────────────────┴──────────────────────┘
+                                │
+                                ▼
+                  ┌──────────────────────────┐
+                  │  promote-base-latest     │   crane copy
+                  │                          │   base-<hash>
+                  │                          │   → base-latest
+                  └────────┬─────────────────┘
+                           │
+                           ▼
+                  ┌──────────────────────────┐
+                  │  update-description      │
+                  └──────────────────────────┘
+```
+
+### Step 1: `base-decide`
+
+Compute a SHA-256 hash over the inputs that determine the base image's
+content:
+
+```sh
+{
+  cat Dockerfile.base
+  find rootfs -type f \
+    ! -path '*/__pycache__/*' \
+    ! -name '*.pyc' \
+    ! -name '.DS_Store' \
+    ! -name '._*' \
+    -print0 | sort -z | xargs -0 cat
+  cat entrypoint.sh entrypoint-user.sh
+} | sha256sum | cut -c1-12
+```
+
+Junk filters keep the local recompute reproducible against CI's clean
+checkout — `__pycache__/*.pyc` and macOS metadata files (`.DS_Store`,
+`._AppleDouble`) are gitignored but still walked by `find -type f`.
+
+The 12-character truncated hash becomes `base-<hash>`. Probe Docker Hub
+for this tag via `docker manifest inspect`:
+
+- If it exists → set `need_build=false`. `build-base` is skipped entirely.
+- If it doesn't → set `need_build=true`. `build-base` runs.
+
+This is the core cache-reuse mechanism. Version-bump-only releases
+(only `Dockerfile.variant` or build-args changed) hit the cache. Releases
+that change anything in the base — apt packages, AWS CLI, Node version,
+locale list, entrypoint scripts — pay the full base-build cost once.
+
+### Step 2: `build-base` (conditional)
+
+Only runs when `need_build=true`. Multi-arch (amd64 + arm64) build of
+`Dockerfile.base`, pushed to `joakimp/opencode-devbox:base-<hash>`.
+Registry cache via `--cache-from/--cache-to` reduces incremental rebuilds
+when only one or two layers changed.
+
+The base image is **not** tagged `base-latest` here — that promotion
+happens at the very end after all variants succeed (see step 5).
+
+### Step 3: `smoke-*` (×4, parallel)
+
+For each variant: build amd64-only against the base tag, load into
+local docker, run [`scripts/smoke-test.sh`](../scripts/smoke-test.sh).
+Variant build-args:
+
+| variant | INSTALL_OPENCODE | INSTALL_OMOS | INSTALL_PI |
+|---|---|---|---|
+| `base` | true | false | false |
+| `omos` | true | true | false |
+| `with-pi` | true | false | true |
+| `omos-with-pi` | true | true | true |
+
+Smoke runs `--variant <name>` to enable variant-specific assertions.
+Gate the publish: a smoke failure for variant X blocks `build-variant-X`.
+
+### Step 4: `build-variant-*` (×4, parallel)
+
+For each variant that passed smoke: multi-arch (amd64 + arm64) build of
+`Dockerfile.variant`, pushed to Docker Hub with the user-facing release
+tags:
+
+| Build job | Tags pushed |
+|---|---|
+| `build-variant-base` | `vX.Y.Z`, `latest` |
+| `build-variant-omos` | `vX.Y.Z-omos`, `latest-omos` |
+| `build-variant-with-pi` | `vX.Y.Z-with-pi`, `latest-with-pi` |
+| `build-variant-omos-with-pi` | `vX.Y.Z-omos-with-pi`, `latest-omos-with-pi` |
+
+The `latest*` aliases are only updated when `promote_latest=true` (the
+manual dispatch input) — for test runs, `promote_latest=false` keeps the
+production aliases pointing at the previous good release.
+
+### Step 5: `promote-base-latest`
+
+Once all four variants successfully publish, re-tag `base-<hash>` as
+`base-latest` using `crane copy`. This is a **manifest-level re-tag, not
+a rebuild** — it touches only Docker Hub's image index, takes seconds,
+and is atomic.
+
+The reason this happens *after* variants succeed (rather than alongside
+`build-base`) is so a partial failure leaves `base-latest` pointing at
+the previous known-good base. External consumers who pin to
+`base-latest` (e.g. the planned pi-devbox repo) never see a broken base.
+
+### Step 6: `update-description`
+
+Push the generated `DOCKER_HUB.md` to the Hub repo's `full_description`
+field via the Hub REST API. Same step as the production pipeline.
+
+## NPM_CONFIG_PREFIX gotcha (variant override pattern)
+
+The base sets
+
+```
+ENV NPM_CONFIG_PREFIX=/home/developer/.pi/npm-global
+```
+
+This is intentional — it makes `pi install npm:<pkg>` and `npm install -g`
+land on the `devbox-pi-config` named volume at runtime, so user-installed
+packages survive container recreate AND image rebuild.
+
+But the *variant build* inherits this prefix at build time. If left as-is,
+`npm install -g opencode-ai@$VERSION` in `Dockerfile.variant` would
+install opencode into `/home/developer/.pi/npm-global/...`, which is then
+**shadowed by the volume mount at runtime** → opencode disappears from
+PATH on first start.
+
+Fix: each `npm install -g` in `Dockerfile.variant` overrides the prefix
+per-RUN:
+
+```dockerfile
+RUN NPM_CONFIG_PREFIX=/usr npm install -g opencode-ai@${OPENCODE_VERSION}
+```
+
+Baked binaries land on `/usr/bin/...` (system prefix), survive the volume
+mount. Runtime-installed user packages still land on
+`~/.pi/npm-global/...`. Both visible on PATH.
+
+## Cache strategy
+
+Two registry caches are configured:
+
+```yaml
+cache-from: type=registry,ref=joakimp/opencode-devbox:base-buildcache
+cache-to:   type=registry,ref=joakimp/opencode-devbox:base-buildcache,mode=max
+
+cache-from: type=registry,ref=joakimp/opencode-devbox:base-variant-buildcache
+cache-to:   type=registry,ref=joakimp/opencode-devbox:base-variant-buildcache,mode=max
+```
+
+`mode=max` exports cache for *all* layers, not just the final image's
+layers. Important for multi-arch builds where the cross-arch layer reuse
+matters more.
+
+## Wall-clock estimates
+
+| Scenario | Production pipeline | Split-base pipeline |
+|---|---|---|
+| Version-bump-only release (only opencode/pi/omos version changed) | ~165–180 min | **~30–40 min** (base cache hit) |
+| Base-touching release (apt/Node/Debian/entrypoint change) | ~165–180 min | **~70–90 min** (base rebuilds) |
+
+The split-base pipeline pays its dues on base-touching releases (which are
+infrequent — a few times a year for Debian / Node major version bumps).
+Most releases are version-bumps and ride the cache.
+
+## Validate workflow
+
+[`validate.yml`](workflows/validate.yml) is the lightweight gate that runs
+on every push to `main` and on PRs. It:
+
+1. Runs `scripts/generate-dockerhub-md.py --check` to enforce
+   `DOCKER_HUB.md` is in sync with `HUB_TEMPLATE`.
+2. Builds each of the four variants amd64-only (no multi-arch, no push)
+   and runs `scripts/smoke-test.sh`.
+
+This catches regressions before they reach a tag push. Wall clock ~30 min.
+
+## Runner expectations
+
+- **Image:** `catthehacker/ubuntu:act-latest`. Each job runs inside a
+  fresh container of this image. Don't assume any pre-installed
+  toolchains beyond what catthehacker ships.
+- **Disk pressure:** the runner host has ~40 GB of usable overlay space,
+  often 70%+ used at job start. Every job that does `load: true` (smoke)
+  starts with a `Reclaim runner disk` step that strips
+  catthehacker-resident toolchains (Android SDK, .NET, Swift, GHC, JVM,
+  Boost, Chromium, PowerShell) and prunes stale docker state. Don't
+  remove these steps without testing on a fresh runner.
+- **Concurrency:** 2 runners. Jobs in the same workflow run can fan out to
+  both; jobs in *different* workflow runs are serialized by gitea's queue.
+  The `concurrency: { group: ${{ workflow }}-${{ ref }}, cancel-in-progress: false }`
+  setting keeps tag pushes from racing each other but allows
+  per-PR/per-branch parallelism.
+- **Workflow visibility in UI:** gitea Actions only surfaces workflows
+  from the **default branch** in the web UI's workflow list, even for
+  `workflow_dispatch` triggers. Workflows on feature branches are
+  invisible until merged to `main`.
+- **Disk reclaim quirk:** `actions/{upload,download}-artifact@v4+` does
+  not work on Gitea (depends on a GitHub-only Artifact API). Stick to
+  `@v3` if matrix-fanout-with-artifacts is ever needed. We avoided this
+  by using `docker/build-push-action@v7` with comma-separated
+  `platforms: linux/amd64,linux/arm64` — natively does multi-arch push
+  in a single job, no artifact dance.
+
+## Migration plan: split-base → production
+
+1. **Validate the split-base dispatch.** Trigger
+   `docker-publish-split.yml` manually with `release_tag=v0.0.0-split-test`
+   and `promote_latest=false`. Confirm all jobs go green, image sizes
+   match the production baseline within ~10%, and no unexpected layer
+   rebuilds appear in `build-variant-*` logs after the FROM line.
+2. **Run a second dispatch** to confirm cache-hit behavior:
+   `base-decide` should set `need_build=false`, `build-base` should be
+   skipped entirely, total wall clock should drop to ~25–40 min.
+3. **Cut over** — *done as of v1.14.50.* `docker-publish-split.yml` now
+   triggers on `push: tags: v*`. `docker-publish.yml` and original
+   `Dockerfile` deleted.
+4. **Tag a release.** First production release on the new pipeline.
+
+## Related docs
+
+- [`AGENTS.md`](../AGENTS.md) — domain facts, release-day checklist,
+  documentation coupling rules. Read first when modifying CI behavior.
+- [`CHANGELOG.md`](../CHANGELOG.md) — build pipeline rewrite landed in v1.14.50.
+- `Dockerfile.base`, `Dockerfile.variant` — the split-base Dockerfiles.
+  Comments at the top of each explain their role.
+- [`scripts/smoke-test.sh`](../scripts/smoke-test.sh) — invoked by all
+  three workflows; this is the single source of truth for "what does a
+  built image have to satisfy".
+- [`scripts/generate-dockerhub-md.py`](../scripts/generate-dockerhub-md.py)
+  — generates `DOCKER_HUB.md` from `HUB_TEMPLATE`. `--check` enforces
+  sync in `validate.yml`.

.gitea/workflows/docker-publish-split.yml

@@ -0,0 +1,630 @@
+name: Publish Docker Image
+
+# Two-phase split-base build pipeline. Replaces the original
+# docker-publish.yml single-Dockerfile pipeline.
+#
+# Pipeline shape:
+#   1. base-decide      compute base hash from Dockerfile.base + rootfs/
+#                       + entrypoints; probe Docker Hub for existing tag.
+#   2. build-base       only if probe missed; multi-arch push of base-<hash>.
+#   3. smoke-* (×4)     amd64-only build of each variant FROMing the base
+#                       tag; runs scripts/smoke-test.sh.
+#   4. build-variant-*  multi-arch push of each variant tag (the user-
+#       (×4)            facing release tags, unchanged in shape).
+#   5. promote-base-latest  re-tag base-<hash> → base-latest with `crane copy`
+#                       (manifest copy, no rebuild).
+#   6. update-description   patch Docker Hub description (unchanged).
+
+on:
+  push:
+    tags:
+      - 'v*'
+  workflow_dispatch:
+    inputs:
+      release_tag:
+        description: 'Release tag to publish (e.g. v1.14.50). Used only for workflow_dispatch runs — tag-triggered runs derive the tag from github.ref.'
+        required: false
+        default: ''
+      promote_latest:
+        description: 'Update latest/* aliases (default true for tag-push, set false for manual test runs)'
+        required: false
+        default: 'false'
+
+concurrency:
+  group: ${{ github.workflow }}-${{ github.ref }}
+  cancel-in-progress: false
+
+env:
+  BUILDKIT_PROGRESS: plain
+  IMAGE: ${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox
+  RELEASE_TAG: ${{ github.ref_type == 'tag' && github.ref_name || inputs.release_tag }}
+  PROMOTE_LATEST: ${{ github.ref_type == 'tag' && 'true' || inputs.promote_latest }}
+
+# ───────────────────────────────────────────────────────────────────
+# Reusable disk-reclaim snippet — strips catthehacker toolchains and
+# stale docker state. Identical to the production workflow's pattern.
+# ───────────────────────────────────────────────────────────────────
+
+jobs:
+  # ── Phase 1: decide whether base needs rebuilding ──────────────────
+  base-decide:
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    outputs:
+      base_tag: ${{ steps.compute.outputs.base_tag }}
+      need_build: ${{ steps.probe.outputs.need_build }}
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Compute base tag from Dockerfile.base + dependencies
+        id: compute
+        run: |
+          # Hash inputs that determine the base image's contents.
+          # Order is fixed via `find -print0 | sort -z` for reproducibility.
+          # Junk filters: __pycache__/*.pyc and macOS metadata (.DS_Store,
+          # ._AppleDouble) are gitignored locally but still picked up by
+          # `find rootfs -type f`, which would diverge the local hash from
+          # CI's clean checkout. Exclude them defensively here.
+          HASH=$(
+            {
+              cat Dockerfile.base
+              find rootfs -type f \
+                ! -path '*/__pycache__/*' \
+                ! -name '*.pyc' \
+                ! -name '.DS_Store' \
+                ! -name '._*' \
+                -print0 2>/dev/null | sort -z | xargs -0 cat 2>/dev/null
+              cat entrypoint.sh entrypoint-user.sh
+            } | sha256sum | cut -c1-12
+          )
+          BASE_TAG="base-${HASH}"
+          echo "base_tag=${BASE_TAG}" >> "$GITHUB_OUTPUT"
+          echo "Computed base tag: ${BASE_TAG}"
+
+      - name: Force IPv4 for Docker Hub
+        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+
+      - name: Probe Docker Hub for existing base tag
+        id: probe
+        run: |
+          set +e
+          docker manifest inspect "${IMAGE}:${{ steps.compute.outputs.base_tag }}" \
+            > /dev/null 2>&1
+          PROBE_RC=$?
+          set -e
+          if [ "${PROBE_RC}" = "0" ]; then
+            echo "need_build=false" >> "$GITHUB_OUTPUT"
+            echo "Base tag ${IMAGE}:${{ steps.compute.outputs.base_tag }} exists — skipping rebuild."
+          else
+            echo "need_build=true" >> "$GITHUB_OUTPUT"
+            echo "Base tag ${IMAGE}:${{ steps.compute.outputs.base_tag }} missing — will build."
+          fi
+
+  # ── Phase 2: build & push base (multi-arch), only when needed ──────
+  build-base:
+    needs: [base-decide]
+    if: needs.base-decide.outputs.need_build == 'true'
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Force IPv4 for Docker Hub
+        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+
+      - name: Reclaim runner disk
+        run: |
+          set -x
+          df -h / || true
+          rm -rf \
+            /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          apt-get clean || true
+          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+          df -h / || true
+
+      - name: Set up QEMU
+        uses: docker/setup-qemu-action@v3
+        with:
+          platforms: arm64
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v4
+        with:
+          driver-opts: network=host
+
+      - name: Login to Docker Hub
+        uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+
+      - name: Build and push base (multi-arch)
+        uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.base
+          platforms: linux/amd64,linux/arm64
+          push: true
+          tags: ${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+          # Registry cache for faster repeat base rebuilds (e.g. Node bump).
+          cache-from: type=registry,ref=${{ env.IMAGE }}:base-buildcache
+          cache-to: type=registry,ref=${{ env.IMAGE }}:base-buildcache,mode=max
+
+  # ── Phase 3: amd64 smoke per variant (gates the multi-arch publish) ─
+  # Each smoke job builds amd64-only against the base tag and runs
+  # scripts/smoke-test.sh. base-decide.outputs.base_tag is always set;
+  # build-base may have been skipped (cache hit) but the tag exists either way.
+
+  smoke-base:
+    needs: [base-decide, build-base]
+    if: |
+      always() &&
+      needs.base-decide.result == 'success' &&
+      (needs.build-base.result == 'success' || needs.build-base.result == 'skipped')
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Force IPv4 for Docker Hub
+        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - name: Reclaim runner disk
+        run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - name: Build amd64 variant for smoke
+        uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64
+          push: false
+          load: true
+          tags: opencode-devbox:smoke-base
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=false
+            INSTALL_PI=false
+      - name: Smoke test (amd64)
+        run: bash scripts/smoke-test.sh opencode-devbox:smoke-base --variant base
+
+  smoke-omos:
+    needs: [base-decide, build-base]
+    if: |
+      always() &&
+      needs.base-decide.result == 'success' &&
+      (needs.build-base.result == 'success' || needs.build-base.result == 'skipped')
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64
+          push: false
+          load: true
+          tags: opencode-devbox:smoke-omos
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=true
+            INSTALL_PI=false
+      - run: bash scripts/smoke-test.sh opencode-devbox:smoke-omos --variant omos
+
+  smoke-with-pi:
+    needs: [base-decide, build-base]
+    if: |
+      always() &&
+      needs.base-decide.result == 'success' &&
+      (needs.build-base.result == 'success' || needs.build-base.result == 'skipped')
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64
+          push: false
+          load: true
+          tags: opencode-devbox:smoke-with-pi
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=false
+            INSTALL_PI=true
+      - run: bash scripts/smoke-test.sh opencode-devbox:smoke-with-pi --variant with-pi
+
+  smoke-omos-with-pi:
+    needs: [base-decide, build-base]
+    if: |
+      always() &&
+      needs.base-decide.result == 'success' &&
+      (needs.build-base.result == 'success' || needs.build-base.result == 'skipped')
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64
+          push: false
+          load: true
+          tags: opencode-devbox:smoke-omos-with-pi
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=true
+            INSTALL_PI=true
+      - run: bash scripts/smoke-test.sh opencode-devbox:smoke-omos-with-pi --variant omos-with-pi
+
+  # ── Phase 4: multi-arch publish per variant ────────────────────────
+
+  build-variant-base:
+    needs: [base-decide, smoke-base]
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-qemu-action@v3
+        with: {platforms: arm64}
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - name: Compute version-specific tags
+        id: tags
+        run: |
+          VERSION="${{ env.RELEASE_TAG }}"
+          { echo "tags<<EOF"
+            echo "${IMAGE}:${VERSION}"
+            if [ "${{ env.PROMOTE_LATEST }}" = "true" ]; then
+              echo "${IMAGE}:latest"
+            fi
+            echo "EOF"
+          } >> "$GITHUB_OUTPUT"
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64,linux/arm64
+          push: true
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=false
+            INSTALL_PI=false
+          tags: ${{ steps.tags.outputs.tags }}
+
+  build-variant-omos:
+    needs: [base-decide, smoke-omos]
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-qemu-action@v3
+        with: {platforms: arm64}
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - name: Compute version-specific tags
+        id: tags
+        run: |
+          VERSION="${{ env.RELEASE_TAG }}"
+          { echo "tags<<EOF"
+            echo "${IMAGE}:${VERSION}-omos"
+            if [ "${{ env.PROMOTE_LATEST }}" = "true" ]; then
+              echo "${IMAGE}:latest-omos"
+            fi
+            echo "EOF"
+          } >> "$GITHUB_OUTPUT"
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64,linux/arm64
+          push: true
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=true
+            INSTALL_PI=false
+          tags: ${{ steps.tags.outputs.tags }}
+
+  build-variant-with-pi:
+    needs: [base-decide, smoke-with-pi]
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-qemu-action@v3
+        with: {platforms: arm64}
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - name: Compute version-specific tags
+        id: tags
+        run: |
+          VERSION="${{ env.RELEASE_TAG }}"
+          { echo "tags<<EOF"
+            echo "${IMAGE}:${VERSION}-with-pi"
+            if [ "${{ env.PROMOTE_LATEST }}" = "true" ]; then
+              echo "${IMAGE}:latest-with-pi"
+            fi
+            echo "EOF"
+          } >> "$GITHUB_OUTPUT"
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64,linux/arm64
+          push: true
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=false
+            INSTALL_PI=true
+          tags: ${{ steps.tags.outputs.tags }}
+
+  build-variant-omos-with-pi:
+    needs: [base-decide, smoke-omos-with-pi]
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+      - run: |
+          rm -rf /opt/hostedtoolcache /opt/microsoft /opt/az /opt/ghc \
+            /usr/local/.ghcup /usr/share/dotnet /usr/share/swift \
+            /usr/local/lib/android /usr/local/share/powershell \
+            /usr/local/share/chromium /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+      - uses: docker/setup-qemu-action@v3
+        with: {platforms: arm64}
+      - uses: docker/setup-buildx-action@v4
+        with: {driver-opts: network=host}
+      - uses: docker/login-action@v3
+        with:
+          username: ${{ vars.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+      - name: Compute version-specific tags
+        id: tags
+        run: |
+          VERSION="${{ env.RELEASE_TAG }}"
+          { echo "tags<<EOF"
+            echo "${IMAGE}:${VERSION}-omos-with-pi"
+            if [ "${{ env.PROMOTE_LATEST }}" = "true" ]; then
+              echo "${IMAGE}:latest-omos-with-pi"
+            fi
+            echo "EOF"
+          } >> "$GITHUB_OUTPUT"
+      - uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64,linux/arm64
+          push: true
+          build-args: |
+            BASE_IMAGE=${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }}
+            INSTALL_OPENCODE=true
+            INSTALL_OMOS=true
+            INSTALL_PI=true
+          tags: ${{ steps.tags.outputs.tags }}
+
+  # ── Phase 5: promote base-<hash> → base-latest (manifest copy only) ─
+  promote-base-latest:
+    needs:
+      - base-decide
+      - build-variant-base
+      - build-variant-omos
+      - build-variant-with-pi
+      - build-variant-omos-with-pi
+    # Skip on cache-hit base builds: when need_build=false, base-latest
+    # already points at the same digest as base-<hash>, so the retag is
+    # a tautology and any transient failure of it is purely cosmetic.
+    # Manual workflow_dispatch with promote_latest=true overrides this
+    # gate as an escape hatch (e.g., if base-latest got hand-deleted).
+    #
+    # `always()` wrapper + explicit base-variant success check protects
+    # against the gitea-Actions default of "skipped need => skip dependent":
+    # a partial-publish run (e.g., omos-with-pi smoke fails) shouldn't
+    # prevent the base-latest alias from advancing on a real base rebuild.
+    if: |
+      always() &&
+      needs.build-variant-base.result == 'success' &&
+      (inputs.promote_latest == 'true' ||
+       (github.ref_type == 'tag' && needs.base-decide.outputs.need_build == 'true'))
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      # Direct pinned install instead of imjasonh/setup-crane@v0.4. The
+      # action's bootstrap script calls api.github.com/.../releases/latest
+      # to discover the crane version, which periodically rate-limits and
+      # produces tag=null → download from .../download/null/... → 404 →
+      # 'gzip: unexpected end of file' → exit 2. Pinning removes the
+      # runtime dependency on GitHub API entirely. Bump CRANE_VERSION
+      # deliberately when you want updates.
+      - name: Install crane (pinned)
+        env:
+          CRANE_VERSION: v0.21.6
+        run: |
+          set -eux
+          curl -fsSL "https://github.com/google/go-containerregistry/releases/download/${CRANE_VERSION}/go-containerregistry_Linux_x86_64.tar.gz" \
+            | tar -xz -C /usr/local/bin crane
+          crane version
+      - name: Login (crane)
+        run: |
+          crane auth login docker.io \
+            -u ${{ vars.DOCKERHUB_USERNAME }} \
+            -p "${{ secrets.DOCKERHUB_TOKEN }}"
+      - name: Re-tag base-<hash> as base-latest
+        run: |
+          crane copy \
+            ${{ env.IMAGE }}:${{ needs.base-decide.outputs.base_tag }} \
+            ${{ env.IMAGE }}:base-latest
+
+  # ── Phase 6: update Hub description (only on real release runs) ────
+  update-description:
+    needs:
+      - build-variant-base
+      - build-variant-omos
+      - build-variant-with-pi
+      - build-variant-omos-with-pi
+    # Run when at least the base variant published — don't let a single
+    # variant failure (e.g., omos-with-pi smoke threshold) prevent Hub
+    # description refresh for the other variants that did publish.
+    # Without this `always()` wrapper, gitea Actions' default behavior
+    # of "skipped need => skip dependent" cascades from any failed/
+    # skipped build-variant-* into update-description, and the Hub
+    # description goes stale on partial-publish releases.
+    if: |
+      always() &&
+      needs.build-variant-base.result == 'success' &&
+      (github.ref_type == 'tag' || inputs.promote_latest == 'true')
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Update Docker Hub description
+        run: |
+          TOKEN=$(curl -s -X POST https://hub.docker.com/v2/auth/token \
+            -H "Content-Type: application/json" \
+            -d '{"identifier":"${{ vars.DOCKERHUB_USERNAME }}","secret":"${{ secrets.DOCKERHUB_TOKEN }}"}' \
+            | jq -r .access_token)
+          if [ "$TOKEN" = "null" ] || [ -z "$TOKEN" ]; then
+            echo "::error::Failed to authenticate with Docker Hub API"
+            exit 1
+          fi
+          HTTP_CODE=$(jq -n \
+            --rawfile full DOCKER_HUB.md \
+            --arg short "Portable AI dev environment for opencode. Debian-based with git, Node.js, AWS CLI, and SSH support." \
+            '{"full_description": $full, "description": $short}' | \
+            curl -s -o /tmp/hub-response.txt -w "%{http_code}" -X PATCH \
+              "https://hub.docker.com/v2/repositories/${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox/" \
+              -H "Authorization: Bearer $TOKEN" \
+              -H "Content-Type: application/json" \
+              -d @-)
+          if [ "$HTTP_CODE" != "200" ]; then
+            echo "Response body:"
+            cat /tmp/hub-response.txt
+            echo "::error::Docker Hub description update failed with HTTP $HTTP_CODE"
+            exit 1
+          fi

.gitea/workflows/docker-publish.yml

@@ -1,337 +0,0 @@
-name: Publish Docker Image
-
-on:
-  push:
-    tags:
-      - 'v*'
-
-# Serialize concurrent runs of the same workflow on the same ref so the
-# build jobs can't race `docker system prune` in the smoke gates
-# (pruning from one job can nuke another job's in-flight buildx cache).
-# cancel-in-progress: false — tag pushes are release events, we never
-# want to silently drop one.
-concurrency:
-  group: ${{ github.workflow }}-${{ github.ref }}
-  cancel-in-progress: false
-
-# Plain progress output from BuildKit — critical for diagnosing stalls
-# inside arm64-under-QEMU builds where the default collapsed progress UI
-# hides which step is stuck.
-env:
-  BUILDKIT_PROGRESS: plain
-
-# Runner disk pressure notes:
-# Gitea Actions runners use `catthehacker/ubuntu:act-latest` on a shared host
-# with limited overlay space (~40 GB, often 70%+ used at start). Two jobs
-# per variant:
-#   * smoke gate (amd64 only, `load: true` into local dockerd for smoke
-#     testing) — peak disk = tarball + unpacked image + buildx cache. The
-#     `Reclaim runner disk` step below strips catthehacker-resident
-#     toolchains and prunes stale docker state before buildx starts.
-#   * build job (amd64 + arm64, `push-by-digest` streaming directly to
-#     Docker Hub, no local unpack). Peak disk on push-by-digest is
-#     BuildKit's content store only — much smaller than `load: true`.
-#     `docker/build-push-action@v7` with comma-separated platforms
-#     publishes a proper multi-arch manifest in one step.
-#
-# Why not matrix + digest artifacts?
-#   An earlier revision split each arch into its own matrix job and used
-#   `actions/upload-artifact` to pass digests to a merge job. On Gitea
-#   Actions, `actions/{upload,download}-artifact@v4+` fails with
-#   `GHESNotSupportedError` — v4 relies on a GitHub-specific Artifact
-#   API that Gitea doesn't implement. Rather than downgrade to @v3 (the
-#   last Gitea-compatible release) we collapsed back to single-job
-#   multi-arch push. The matrix only helps when the build literally
-#   cannot fit on one runner, which push-by-digest + reclaim no longer
-#   hits for this image.
-#
-# Gitea Actions gotchas baked into this file:
-#   * `actions/{upload,download}-artifact` must stay at @v3 on Gitea.
-#   * Step scripts run under /bin/sh (dash) — no bash-isms like
-#     ${VAR//a/b}. Use `tr` or explicit `shell: bash`.
-#   * `docker/build-push-action@v7` with `platforms: a,b` works for
-#     multi-arch push natively; no matrix/merge dance needed.
-
-jobs:
-  # ── Smoke test (amd64 only, gates the push jobs) ────────────────────
-  smoke-base:
-    runs-on: ubuntu-latest
-    container:
-      image: catthehacker/ubuntu:act-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Force IPv4 for Docker Hub
-        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
-
-      # See docker-publish.yml preamble. `load: true` peak disk = tarball
-      # + unpacked image + buildx cache; the image now crosses the 40 GB
-      # runner overlay's starting headroom. Strip catthehacker-resident
-      # toolchains and any stale docker state up front.
-      - name: Reclaim runner disk
-        run: |
-          set -x
-          df -h / || true
-          rm -rf \
-            /opt/hostedtoolcache \
-            /opt/microsoft \
-            /opt/az \
-            /opt/ghc \
-            /usr/local/.ghcup \
-            /usr/share/dotnet \
-            /usr/share/swift \
-            /usr/local/lib/android \
-            /usr/local/share/powershell \
-            /usr/local/share/chromium \
-            /usr/local/share/boost \
-            /usr/lib/jvm 2>/dev/null || true
-          apt-get clean || true
-          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
-          docker system df || true
-          docker system prune -af --volumes || true
-          docker builder prune -af || true
-          df -h / || true
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
-        with:
-          driver-opts: network=host
-
-      - name: Build and load amd64 image for smoke test
-        uses: docker/build-push-action@v7
-        with:
-          context: .
-          platforms: linux/amd64
-          push: false
-          load: true
-          tags: opencode-devbox:smoke-base
-
-      - name: Smoke test (amd64)
-        run: bash scripts/smoke-test.sh opencode-devbox:smoke-base --variant base
-
-  smoke-omos:
-    runs-on: ubuntu-latest
-    container:
-      image: catthehacker/ubuntu:act-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Force IPv4 for Docker Hub
-        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
-
-      - name: Reclaim runner disk
-        run: |
-          set -x
-          df -h / || true
-          rm -rf \
-            /opt/hostedtoolcache \
-            /opt/microsoft \
-            /opt/az \
-            /opt/ghc \
-            /usr/local/.ghcup \
-            /usr/share/dotnet \
-            /usr/share/swift \
-            /usr/local/lib/android \
-            /usr/local/share/powershell \
-            /usr/local/share/chromium \
-            /usr/local/share/boost \
-            /usr/lib/jvm 2>/dev/null || true
-          apt-get clean || true
-          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
-          docker system df || true
-          docker system prune -af --volumes || true
-          docker builder prune -af || true
-          df -h / || true
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
-        with:
-          driver-opts: network=host
-
-      - name: Build and load amd64 image for smoke test
-        uses: docker/build-push-action@v7
-        with:
-          context: .
-          platforms: linux/amd64
-          push: false
-          load: true
-          build-args: |
-            INSTALL_OMOS=true
-          tags: opencode-devbox:smoke-omos
-
-      - name: Smoke test (amd64)
-        run: bash scripts/smoke-test.sh opencode-devbox:smoke-omos --variant omos
-
-  # ── Multi-arch push (single job per variant, comma-separated platforms) ─
-  build-base:
-    runs-on: ubuntu-latest
-    needs: smoke-base
-    timeout-minutes: 90
-    container:
-      image: catthehacker/ubuntu:act-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Force IPv4 for Docker Hub
-        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
-
-      # Lighter reclaim than the smoke-gate version: push-by-digest
-      # doesn't write to host dockerd, so `docker system prune` adds
-      # little. BuildKit cache from prior runs is the thing to clear.
-      - name: Reclaim runner disk
-        run: |
-          set -x
-          df -h / || true
-          rm -rf \
-            /opt/hostedtoolcache \
-            /opt/microsoft \
-            /opt/az \
-            /opt/ghc \
-            /usr/local/.ghcup \
-            /usr/share/dotnet \
-            /usr/share/swift \
-            /usr/local/lib/android \
-            /usr/local/share/powershell \
-            /usr/local/share/chromium \
-            /usr/local/share/boost \
-            /usr/lib/jvm 2>/dev/null || true
-          apt-get clean || true
-          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
-          docker builder prune -af || true
-          df -h / || true
-
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
-        with:
-          platforms: arm64
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
-        with:
-          driver-opts: network=host
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v4
-        with:
-          username: ${{ vars.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Extract version from tag
-        id: version
-        run: echo "version=${GITHUB_REF#refs/tags/}" >> $GITHUB_OUTPUT
-
-      - name: Build and push (multi-arch)
-        uses: docker/build-push-action@v7
-        with:
-          context: .
-          platforms: linux/amd64,linux/arm64
-          push: true
-          tags: |
-            ${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox:${{ steps.version.outputs.version }}
-            ${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox:latest
-
-  build-omos:
-    runs-on: ubuntu-latest
-    needs: smoke-omos
-    timeout-minutes: 90
-    container:
-      image: catthehacker/ubuntu:act-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Force IPv4 for Docker Hub
-        run: echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
-
-      - name: Reclaim runner disk
-        run: |
-          set -x
-          df -h / || true
-          rm -rf \
-            /opt/hostedtoolcache \
-            /opt/microsoft \
-            /opt/az \
-            /opt/ghc \
-            /usr/local/.ghcup \
-            /usr/share/dotnet \
-            /usr/share/swift \
-            /usr/local/lib/android \
-            /usr/local/share/powershell \
-            /usr/local/share/chromium \
-            /usr/local/share/boost \
-            /usr/lib/jvm 2>/dev/null || true
-          apt-get clean || true
-          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
-          docker builder prune -af || true
-          df -h / || true
-
-      - name: Set up QEMU
-        uses: docker/setup-qemu-action@v4
-        with:
-          platforms: arm64
-
-      - name: Set up Docker Buildx
-        uses: docker/setup-buildx-action@v4
-        with:
-          driver-opts: network=host
-
-      - name: Login to Docker Hub
-        uses: docker/login-action@v4
-        with:
-          username: ${{ vars.DOCKERHUB_USERNAME }}
-          password: ${{ secrets.DOCKERHUB_TOKEN }}
-
-      - name: Extract version from tag
-        id: version
-        run: echo "version=${GITHUB_REF#refs/tags/}" >> $GITHUB_OUTPUT
-
-      - name: Build and push (multi-arch)
-        uses: docker/build-push-action@v7
-        with:
-          context: .
-          platforms: linux/amd64,linux/arm64
-          push: true
-          build-args: |
-            INSTALL_OMOS=true
-          tags: |
-            ${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox:${{ steps.version.outputs.version }}-omos
-            ${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox:latest-omos
-
-  update-description:
-    runs-on: ubuntu-latest
-    needs: [build-base, build-omos]
-    container:
-      image: catthehacker/ubuntu:act-latest
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v4
-
-      - name: Update Docker Hub description
-        run: |
-          TOKEN=$(curl -s -X POST https://hub.docker.com/v2/auth/token \
-            -H "Content-Type: application/json" \
-            -d '{"identifier":"${{ vars.DOCKERHUB_USERNAME }}","secret":"${{ secrets.DOCKERHUB_TOKEN }}"}' \
-            | jq -r .access_token)
-          if [ "$TOKEN" = "null" ] || [ -z "$TOKEN" ]; then
-            echo "::error::Failed to authenticate with Docker Hub API"
-            exit 1
-          fi
-          HTTP_CODE=$(jq -n \
-            --rawfile full DOCKER_HUB.md \
-            --arg short "Portable AI dev environment for opencode. Debian-based with git, Node.js, AWS CLI, and SSH support." \
-            '{"full_description": $full, "description": $short}' | \
-            curl -s -o /tmp/hub-response.txt -w "%{http_code}" -X PATCH \
-              "https://hub.docker.com/v2/repositories/${{ vars.DOCKERHUB_USERNAME }}/opencode-devbox/" \
-              -H "Authorization: Bearer $TOKEN" \
-              -H "Content-Type: application/json" \
-              -d @-)
-          echo "Docker Hub API returned: $HTTP_CODE"
-          if [ "$HTTP_CODE" != "200" ]; then
-            echo "Response body:"
-            cat /tmp/hub-response.txt
-            echo "::error::Docker Hub description update failed with HTTP $HTTP_CODE"
-            exit 1
-          fi

.gitea/workflows/validate.yml

@@ -2,8 +2,24 @@ name: Validate
 
 # Lightweight validation on pushes to main. Builds single-arch (amd64),
 # runs the smoke test, and checks image size — without pushing anything
-# to Docker Hub. Tag pushes are handled by docker-publish.yml which
-# does the full multi-arch build-and-push.
+# to Docker Hub. Tag pushes are handled by docker-publish-split.yml which
+# does the full multi-arch split-base build-and-push.
+#
+# Trade-off: variant builds here use the published `base-latest` image
+# from Docker Hub as their parent, NOT a locally-built base. This is
+# because `docker/build-push-action@v7` runs each invocation in its own
+# buildx container context, so an image loaded into the host docker
+# daemon by step N is not visible to step N+1's buildx invocation.
+# Building base + variant in the same job would require either pushing
+# the base to a registry or sharing a buildx instance across steps — both
+# significantly more complex than just using the published base.
+#
+# Consequence: PRs/pushes that change Dockerfile.base, rootfs/, or
+# entrypoint*.sh are NOT exercised by this workflow. The release path
+# (docker-publish-split.yml on tag push) does build the new base, so
+# release tags are the gate that fully validates base-image changes.
+# The base-change-warning job below surfaces a runtime warning when this
+# blind-spot applies.
 
 on:
   push:
@@ -34,6 +50,33 @@ jobs:
         run: |
           python3 scripts/generate-dockerhub-md.py --check
 
+  base-change-warning:
+    # Surfaces a warning when this commit changes base-image inputs
+    # (Dockerfile.base, rootfs/, entrypoint*.sh). validate.yml uses
+    # Hub's base-latest as the parent for variant builds, so changes to
+    # those files are NOT exercised here — only release tags rebuild the
+    # base via docker-publish-split.yml.
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 2
+
+      - name: Detect base-input changes
+        run: |
+          set -e
+          if ! git diff --name-only HEAD~1 HEAD 2>/dev/null \
+              | grep -qE '^(Dockerfile\.base|rootfs/|entrypoint.*\.sh)$'; then
+            echo "No base-image inputs changed in this commit — validate.yml fully exercises the published base-latest."
+            exit 0
+          fi
+          echo "::warning::This commit changes base-image inputs (Dockerfile.base, rootfs/, or entrypoint*.sh). validate.yml uses Hub's base-latest as the parent for variant builds, so the new base is NOT exercised by this workflow. Cut a release tag, or run a workflow_dispatch of docker-publish-split.yml against a test tag (e.g. v0.0.0-base-test, promote_latest=false) for end-to-end validation of the new base."
+          echo "Changed base-input files:"
+          git diff --name-only HEAD~1 HEAD | grep -E '^(Dockerfile\.base|rootfs/|entrypoint.*\.sh)$'
+
   validate-base:
     runs-on: ubuntu-latest
     container:
@@ -83,9 +126,12 @@ jobs:
         uses: docker/build-push-action@v7
         with:
           context: .
+          file: Dockerfile.variant
           platforms: linux/amd64
           push: false
           load: true
+          build-args: |
+            BASE_IMAGE=joakimp/opencode-devbox:base-latest
           tags: opencode-devbox:ci-base
 
       - name: Smoke test
@@ -137,13 +183,132 @@ jobs:
         uses: docker/build-push-action@v7
         with:
           context: .
+          file: Dockerfile.variant
           platforms: linux/amd64
           push: false
           load: true
           build-args: |
+            BASE_IMAGE=joakimp/opencode-devbox:base-latest
             INSTALL_OMOS=true
           tags: opencode-devbox:ci-omos
 
       - name: Smoke test
         run: |
           bash scripts/smoke-test.sh opencode-devbox:ci-omos --variant omos
+
+  validate-with-pi:
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Force IPv4 for Docker Hub
+        run: |
+          echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+
+      - name: Reclaim runner disk
+        run: |
+          set -x
+          df -h / || true
+          rm -rf \
+            /opt/hostedtoolcache \
+            /opt/microsoft \
+            /opt/az \
+            /opt/ghc \
+            /usr/local/.ghcup \
+            /usr/share/dotnet \
+            /usr/share/swift \
+            /usr/local/lib/android \
+            /usr/local/share/powershell \
+            /usr/local/share/chromium \
+            /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          apt-get clean || true
+          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
+          docker system df || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+          df -h / || true
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v4
+        with:
+          driver-opts: network=host
+
+      - name: Build with-pi image (amd64, load to local daemon)
+        uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64
+          push: false
+          load: true
+          build-args: |
+            BASE_IMAGE=joakimp/opencode-devbox:base-latest
+            INSTALL_PI=true
+          tags: opencode-devbox:ci-with-pi
+
+      - name: Smoke test
+        run: |
+          bash scripts/smoke-test.sh opencode-devbox:ci-with-pi --variant with-pi
+
+  validate-omos-with-pi:
+    runs-on: ubuntu-latest
+    container:
+      image: catthehacker/ubuntu:act-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+
+      - name: Force IPv4 for Docker Hub
+        run: |
+          echo 'precedence ::ffff:0:0/96  100' >> /etc/gai.conf
+
+      - name: Reclaim runner disk
+        run: |
+          set -x
+          df -h / || true
+          rm -rf \
+            /opt/hostedtoolcache \
+            /opt/microsoft \
+            /opt/az \
+            /opt/ghc \
+            /usr/local/.ghcup \
+            /usr/share/dotnet \
+            /usr/share/swift \
+            /usr/local/lib/android \
+            /usr/local/share/powershell \
+            /usr/local/share/chromium \
+            /usr/local/share/boost \
+            /usr/lib/jvm 2>/dev/null || true
+          apt-get clean || true
+          rm -rf /var/lib/apt/lists/* /tmp/* /var/tmp/* || true
+          docker system df || true
+          docker system prune -af --volumes || true
+          docker builder prune -af || true
+          df -h / || true
+
+      - name: Set up Docker Buildx
+        uses: docker/setup-buildx-action@v4
+        with:
+          driver-opts: network=host
+
+      - name: Build omos+with-pi image (amd64, load to local daemon)
+        uses: docker/build-push-action@v7
+        with:
+          context: .
+          file: Dockerfile.variant
+          platforms: linux/amd64
+          push: false
+          load: true
+          build-args: |
+            BASE_IMAGE=joakimp/opencode-devbox:base-latest
+            INSTALL_OMOS=true
+            INSTALL_PI=true
+          tags: opencode-devbox:ci-omos-with-pi
+
+      - name: Smoke test
+        run: |
+          bash scripts/smoke-test.sh opencode-devbox:ci-omos-with-pi --variant omos-with-pi

AGENTS.md

@@ -2,45 +2,59 @@
 
 ## Project overview
 
-Docker image packaging [opencode](https://opencode.ai) into a production-ready dev container. Two image variants (base and omos) are published to Docker Hub via Gitea Actions CI. Not a library or application — this is infrastructure (Dockerfile, entrypoint scripts, docker-compose, documentation).
+Docker image packaging [opencode](https://opencode.ai) into a production-ready dev container. Image variants are published to Docker Hub via Gitea Actions CI. Not a library or application — this is infrastructure (Dockerfiles, entrypoint scripts, docker-compose, documentation).
 
 ## File roles
 
-- `Dockerfile` — single multi-stage build for both variants. OMOS variant is controlled by `INSTALL_OMOS=true` build arg; mempalace is controlled by `INSTALL_MEMPALACE` (default `true`). All GitHub-sourced binaries are pinned with version ARGs.
-- `entrypoint.sh` — runs as root: UID/GID adjustment, SSH permissions, volume ownership fixes (skipped via `.devbox-owner` sentinel when ownership is already correct). Then drops to developer via gosu.
-- `entrypoint-user.sh` — runs as developer: git config, opencode.jsonc generation (delegated to `generate-config.py`), skillset auto-deploy from mounted skillset repo, OMOS setup.
+- `Dockerfile.base` — variant-independent layers (apt, locales, AWS CLI, Node.js, mempalace, gitea-mcp, user setup, chromadb prewarm, ENVs, entrypoints). Published as `joakimp/opencode-devbox:base-<sha12>`. Rebuilt only when its content hash changes.
+- `Dockerfile.variant` — `FROM`s the base and adds only opencode/omos/pi installs gated by build args: `INSTALL_OPENCODE` (default true), `INSTALL_OMOS`, `INSTALL_PI`, and `INSTALL_MEMPALACE`. All GitHub-sourced binaries are pinned with version ARGs.
+- `entrypoint.sh` — runs as root: UID/GID adjustment, SSH permissions, volume ownership fixes (skipped via `.devbox-owner` sentinel when ownership is already correct). Then drops to developer via gosu. Volume ownership loop covers `~/.pi/` when `INSTALL_PI=true`.
+- `entrypoint-user.sh` — runs as developer: git config, opencode.jsonc generation (delegated to `generate-config.py`), pi-toolkit + pi-extensions deploy (when pi installed), pi settings.json bootstrap, mempalace pi-bridge symlink, skillset auto-deploy from mounted skillset repo, OMOS setup.
 - `rootfs/usr/local/lib/opencode-devbox/generate-config.py` — generates `~/.config/opencode/opencode.jsonc` from env vars. Never overwrites an existing config (checks both `.json` and `.jsonc`). Auto-registers MCP servers for detected tools (mempalace via `mempalace-mcp`, gitea-mcp, context7 remote endpoint).
 - `scripts/smoke-test.sh` — post-build image verification. Asserts binary presence, opencode startup, entrypoint correctness, config generation idempotency, and image size thresholds. Used by both CI workflows.
-- `scripts/generate-dockerhub-md.py` — generates `DOCKER_HUB.md` from `README.md` using explicit section rules. `--check` fails if the committed file is out of sync (enforced by the `validate` workflow).
-- `DOCKER_HUB.md` — **auto-generated** from README. Do not edit directly. Pushed to Docker Hub description via CI API call. Must stay under 25 kB. Short description field must be ≤100 bytes.
-- `README.md` — authoritative source documentation. Sections are selected/dropped/replaced for DOCKER_HUB.md per `SECTION_RULES` in `scripts/generate-dockerhub-md.py`.
+- `scripts/generate-dockerhub-md.py` — generates `DOCKER_HUB.md` from a hand-maintained `HUB_TEMPLATE` constant. `--check` fails if the committed file is out of sync (enforced by the `validate` workflow).
+- `DOCKER_HUB.md` — **auto-generated** from `HUB_TEMPLATE` in `scripts/generate-dockerhub-md.py`. Do not edit directly. Pushed to Docker Hub description via CI API call. Must stay under 25 kB. Short description field must be ≤100 bytes.
+- `README.md` — authoritative source documentation for everything in this repo. Independent of `DOCKER_HUB.md`: the Hub doc is hand-maintained in the generator's `HUB_TEMPLATE` and intentionally slim, linking back to the gitea README for depth.
+- `.gitea/README.md` — **read this first** if you're touching CI. Architectural overview of the build pipeline (production vs split-base), wall-clock estimates, NPM_CONFIG_PREFIX gotcha, runner expectations, migration plan.
 - `.gitea/workflows/validate.yml` — lightweight amd64 build + smoke test on push to main and PRs. Also runs the DOCKER_HUB.md sync check.
-- `.gitea/workflows/docker-publish.yml` — CI pipeline on tag push: smoke-test each variant on amd64, then full multi-arch (amd64 + arm64) build-and-push, then update Docker Hub description.
+- `.gitea/workflows/docker-publish-split.yml` — production CI pipeline on tag push (`v*`). Two-phase split-base: computes base hash, conditionally builds base, runs 4 parallel smoke tests, then 4 parallel multi-arch variant builds, promotes `base-latest` alias, updates Docker Hub description.
 
 ## Versioning scheme
 
 Tags follow `v{opencode_version}[letter]` — e.g. `v1.14.20` for the first build on a new opencode release, and `v1.14.20b`, `v1.14.20c`, … for subsequent rebuilds on the same opencode version.
 
-- The number tracks the opencode npm version (see `OPENCODE_VERSION` ARG in `Dockerfile`).
+- The number tracks the opencode npm version (see `OPENCODE_VERSION` ARG in `Dockerfile.variant`).
 - **No letter suffix** on the first build of a new opencode version — the bare `v{opencode_version}` tag is the canonical release.
 - **Letter suffix is the build ordinal**, starting at `b` for the second build. The letter `a` is **never used** — think of the suffix as counting rebuilds: `b = 2nd, c = 3rd, d = 4th, …`. For opencode version `1.14.20`: first build `v1.14.20`, second `v1.14.20b`, third `v1.14.20c`, and so on.
 - A letter suffix is only used for container-level rebuilds — tooling changes, CVE fixes, doc-driven rebuilds, entrypoint bugfixes — that don't change the underlying opencode version.
 
-CI produces four Docker Hub tags per release: `vX.Y.Z[n]`, `latest`, `vX.Y.Z[n]-omos`, `latest-omos`.
+CI produces eight Docker Hub tags per release: `vX.Y.Z[n]`, `latest`, `vX.Y.Z[n]-omos`, `latest-omos`, `vX.Y.Z[n]-with-pi`, `latest-with-pi`, `vX.Y.Z[n]-omos-with-pi`, `latest-omos-with-pi` — one tag pair (versioned + floating alias) per build variant.
 
-When bumping the opencode version, also bump `OPENCODE_VERSION` in `Dockerfile` and update the comment in `.env.example` if it names a specific model/version for context.
+When bumping the opencode version, bump `OPENCODE_VERSION` in `Dockerfile.variant` and update the comment in `.env.example` if it names a specific model/version for context.
 
 ## Critical conventions
 
 - **entrypoint.sh volume ownership loop** — when adding a new named volume mount point, add it to the `for dir in ...` loop in `entrypoint.sh` so root-owned volumes get chowned on startup. The loop writes a `.devbox-owner` sentinel after a successful chown so subsequent starts skip the recursive walk. Users should not touch these files.
-- **Two docs to keep in sync (automated)** — `README.md` is the source of truth. `DOCKER_HUB.md` is auto-generated by `scripts/generate-dockerhub-md.py`. When adding a new top-level section to README, either add it to `SECTION_RULES` in that script or the `--check` run will fail CI. `.env.example` must still be hand-updated to match Dockerfile/entrypoint behavior.
+- **Documentation coupling on release** — four docs co-vary and drift in lockstep when not updated together:
+  - `README.md` is the source of truth for user-facing build/run/config detail.
+  - `DOCKER_HUB.md` is auto-generated from `HUB_TEMPLATE` in `scripts/generate-dockerhub-md.py`. CI's `--check` run fails if it's stale. Hub-facing copy is intentionally slim (~5.5 kB, ~78% headroom against the 25 kB Hub limit) — update the template here when image variants, quick-start flow, or the elevator pitch change. README.md no longer feeds into Hub, so README edits do NOT require regenerating DOCKER_HUB.md.
+  - `CHANGELOG.md` records every release. When cutting a tag, **promote `## Unreleased` to `## vX.Y.Z[n] — YYYY-MM-DD` BEFORE pushing the tag** so the tag points at a CHANGELOG that names itself. Keep entries reverse-chronological (newest at top, after the `Unreleased` block). Doc-only updates that happen post-tag (Hub description live-patches, README clarifications) get a fresh `## Unreleased` block with a note that they don't trigger a new image build.
+  - `AGENTS.md` (this file) carries domain facts that change on structural releases — tag-count statements, CI job lists, install contracts. After any change to `.gitea/workflows/*.yml` or the variant matrix, grep this file for stale numbers (`grep -nE "four|eight|all [0-9]"`).
+  - `.env.example` must be hand-updated to match Dockerfile/entrypoint behavior — it is not auto-generated.
+
+  Release-day checklist: README → (regenerate DOCKER_HUB.md only if HUB_TEMPLATE changed) → promote CHANGELOG Unreleased → grep AGENTS.md for stale counts → commit → tag → push tag.
+
+  **Between releases the same coupling applies.** Doc drift is not just a release-day concern — a workflow tweak, entrypoint change, or `generate-config.py` refactor can leave any of these four files lying. Before committing a non-release change, grep the docs for references to what you touched: `git diff --name-only HEAD | xargs -I{} grep -l 'thing-you-changed' README.md AGENTS.md DOCKER_HUB.md .gitea/README.md .env.example`. If a doc says "four variants" / "two phases" / "runs on amd64 only" and your change made that no longer true, fix it in the same commit.
 - **GitHub/Gitea-sourced binaries float by default** — gosu, fzf, git-lfs, nvim, bat, eza, zoxide, uv, gitea-mcp, Go, oh-my-opencode-slim all default to `latest`. Each build-time install step reads the `/releases/latest` Location redirect (or the go.dev JSON feed for Go) and derives the concrete version. Use the same `ARCH` case-switch pattern for multi-arch support (amd64/arm64). Intentional pins: `OPENCODE_VERSION` (drives the image tag), `NODE_VERSION=22` (major pin), `DEBIAN_VERSION=trixie-slim` (OS base). Adding a new upstream tool: follow the existing floated-version pattern, don't hardcode a specific tag.
 - **Resolved versions are logged by the smoke test** — `scripts/smoke-test.sh` prints a "Resolved component versions" table as its first step. CI logs always capture what got baked into a given image even when ARGs default to `latest`.
 - **Shell scripts use `set -euo pipefail`** — both entrypoints are strict. Errors in volume chown or SSH permission operations are intentionally suppressed with `|| true`.
 - **MemPalace install path** — installed via `uv tool install` into `/opt/uv-tools/mempalace/`. Both the `mempalace` CLI and the `mempalace-mcp` MCP server binary are shipped as entry points by the mempalace package itself and placed on PATH by uv as shims whose shebangs point at the venv's Python. No hand-rolled wrapper is needed. Do not use `pip install --break-system-packages` — that was the previous approach and has been removed. Do not use `["python3", "-m", "mempalace.mcp_server"]` in `opencode.jsonc` — system Python can't import from the uv venv.
 - **generate-config.py idempotency** — the script MUST never overwrite an existing `opencode.jsonc` or legacy `opencode.json`. Config persists in the `devbox-opencode-config` named volume; accidentally clobbering that file would destroy hand-edits. The smoke test asserts this.
 - **Skillset auto-deploy** — on every container start, `entrypoint-user.sh` looks for a skillset repo (detection order: `$SKILLSET_CONTAINER_PATH` → `$HOME/skillset` → `/workspace/skillset`) and runs `deploy-skills.sh --bootstrap --prune-stale`. This creates relative symlinks in `~/.agents/skills/` and `~/.config/opencode/instructions/`. Do NOT bind-mount `~/.agents/skills/` from the host — the container manages its own skills with relative symlinks that differ from the host's. The named volume `devbox-opencode-config` persists the deployed config across restarts.
-- **Config persistence via named volume** — `devbox-opencode-config` is a Docker named volume mounted at `~/.config/opencode/`. It is NOT a host bind mount by default. This separation allows both native and containerized opencode to coexist on the same machine without symlink conflicts. Users who need to override can replace the named volume with a host bind mount in their compose file.
+- **Config persistence via named volume** — `devbox-opencode-config` is a Docker named volume mounted at `~/.config/opencode/`. It is NOT a host bind mount by default. This separation allows both native and containerized opencode to coexist on the same machine without symlink conflicts. Users who need to override can replace the named volume with a host bind mount in their compose file. **Same pattern for pi:** `devbox-pi-config` is mounted at `~/.pi/` and persists user toggles (`/ext`-disabled extensions), `~/.pi/agent/settings.json` edits, and — because `NPM_CONFIG_PREFIX` is set to `~/.pi/npm-global` — anything installed via `pi install npm:...` or `npm install -g` as the developer user, across container recreate AND image rebuild.
+- **pi install contract** — `INSTALL_PI=true` (default false) opt-in build arg. The baked `pi` binary is npm-installed globally to `/usr` at build time (system prefix). At runtime, `NPM_CONFIG_PREFIX=/home/developer/.pi/npm-global` is set in the image ENV with that prefix's `bin/` prepended to `PATH` — so any `pi install npm:...` or `npm install -g` invoked by the developer user lands on the named volume and survives everything except `docker compose down -v`. The new ENVs are declared *after* all build-time `npm install -g` calls in the Dockerfile so they don't redirect the baked installs into a path that the volume mount would later shadow. If the user runs `npm install -g @earendil-works/pi-coding-agent` themselves, the user-installed copy on the volume wins via `PATH` order; otherwise image rebuild is the upgrade path for the baked pi (same contract as `OPENCODE_VERSION`). The pi-toolkit and pi-extensions repos are git-cloned into `/opt/` at build time, then their `install.sh` runs from `entrypoint-user.sh` on each container start to symlink into `~/.pi/agent/` (which lives on the named volume). The mempalace pi-bridge is symlinked manually from `/opt/mempalace-toolkit/extensions/pi/mempalace.ts` — we do NOT call mempalace-toolkit's full `install.sh` because its `install_skill` step would race with skillset auto-deploy `--prune-stale`.
+- **Pi deploy ordering matters in entrypoint-user.sh** — `pi-toolkit` runs first (creates `keybindings.json` symlink and writes pi-env.zsh), then `pi-extensions`, then `settings.json` template bootstrap, then mempalace bridge symlink. mempalace-toolkit's `check_pi_toolkit` probe (when called from the host install path) expects keybindings to already be present — not currently called from container, but ordering matches host convention.
+- **Default CMD is `bash -l`** — not a harness. `docker compose run --rm devbox` drops the user into a login shell to choose: `aws sso login`, then `opencode` or `pi` (or any tool). Pass the harness explicitly to launch directly: `docker compose run --rm devbox opencode` / `docker compose run --rm devbox pi`. `docker compose exec` bypasses entrypoint+CMD entirely (existing user workflow unchanged).
 - **Docker Hub description update** — uses `/v2/auth/token` endpoint (not the deprecated `/v2/users/login`). Auth uses `identifier`/`secret` fields, returns `access_token`, sent as `Bearer`. Short description must be ≤100 bytes.
 
 ## CI quirks
@@ -49,11 +63,11 @@ When bumping the opencode version, also bump `OPENCODE_VERSION` in `Dockerfile`
 - `update-description` job runs only when both builds succeed (`needs: [build-base, build-omos]`).
 - Tags must be pushed to trigger the publish workflow. The validate workflow runs on push to main and PRs.
 - Smoke tests run on amd64 only (single-arch load into the local daemon). The multi-arch push happens after smoke passes.
-- **Gitea Actions runner has ~40 GB disk, often 70%+ used at job start.** All four `load: true` jobs (`validate-base`, `validate-omos`, `smoke-base`, `smoke-omos`) include a `Reclaim runner disk` step that strips catthehacker-resident toolchains and prunes stale docker state before `setup-buildx-action`. Build jobs use a lighter version (push-by-digest doesn't need `docker system prune`). Don't remove these steps without testing on a fresh runner.
+- **Gitea Actions runner has ~40 GB disk, often 70%+ used at job start.** All eight `load: true` jobs (`validate-base`, `validate-omos`, `validate-with-pi`, `validate-omos-with-pi`, `smoke-base`, `smoke-omos`, `smoke-with-pi`, `smoke-omos-with-pi`) include a `Reclaim runner disk` step that strips catthehacker-resident toolchains and prunes stale docker state before `setup-buildx-action`. Build jobs use a lighter version (push-by-digest doesn't need `docker system prune`). Don't remove these steps without testing on a fresh runner.
 - **`docker/build-push-action@v7` with `platforms: linux/amd64,linux/arm64` handles multi-arch push natively in a single job** — produces a proper manifest list, no matrix or merge step needed. An earlier revision split into per-arch matrix jobs with digest artifacts, but that pattern requires `actions/{upload,download}-artifact@v4+` which Gitea Actions doesn't support (see below).
 - **`actions/upload-artifact` and `actions/download-artifact` must stay at @v3 on Gitea.** v4+ uses a GitHub-Enterprise-specific Artifact API; runs fail with `GHESNotSupportedError`. If you need artifacts for a new reason (build logs, SBOMs, etc.), pin @v3 explicitly.
 - **Step scripts run under `/bin/sh` (dash), not bash.** Avoid bash-isms like `${VAR//a/b}` parameter-pattern substitution; use POSIX alternatives (`tr`, `sed`) or declare `shell: bash` on the step.
-- **`BUILDKIT_PROGRESS=plain`** is set at workflow level on `docker-publish.yml` so arm64-under-QEMU builds log each layer line-by-line. The default collapsed progress UI hides which step is stalled, which made diagnosing earlier hangs expensive.
+- **`BUILDKIT_PROGRESS=plain`** is set at workflow level on `docker-publish-split.yml` so arm64-under-QEMU builds log each layer line-by-line. The default collapsed progress UI hides which step is stalled, which made diagnosing earlier hangs expensive.
 
 ## Testing changes
 

CHANGELOG.md

@@ -6,6 +6,144 @@ Tags follow `v{opencode_version}[letter]` — bare tag for the first build on a
 
 ---
 
+## Unreleased
+
+## v1.15.6 — 2026-05-21
+
+opencode 1.15.4 → 1.15.6 bump (two upstream patch releases) plus two workflow improvements that landed on `main` between v1.15.4b and now. No image-content changes beyond the version bump; cache hit expected on `base-35ee5fe7861a` (no `Dockerfile.base` or `rootfs/` edits).
+
+- **Bump:** opencode 1.15.4 → 1.15.6 (`OPENCODE_VERSION` in `Dockerfile.variant`). The `with-pi` and `omos-with-pi` variants will also implicitly pick up pi 0.75.3 → 0.75.4 since `PI_VERSION=latest` resolves at build time.
+- **CI: defensive `__pycache__` and macOS-metadata filter in `base-decide` hash compute.** `find rootfs -type f` previously included gitignored junk like `rootfs/__pycache__/*.pyc`, `.DS_Store`, and `._AppleDouble` files — which CI's clean checkout never sees. This bit us during v1.15.4 debugging when a stale `generate-config.cpython-314.pyc` on the local rootfs/ produced `base-3605aa6b6ab1` while CI computed `base-35ee5fe7861a`. The filter is a no-op on a clean tree (verified to still produce `35ee5fe7861a` post-filter), but defends against future stale-pyc / Finder-touched-rootfs hash mismatches. `.gitea/README.md` updated in lockstep. (commit `b6e4d89`)
+- **AGENTS.md: documentation drift sweep as explicit pre-commit workflow step.** Codifies the rule that non-release commits must also grep docs for stale claims about behaviour they change, with concrete repo-specific drift hotspots. Companion clause added across the wider repo set (cloud-init, ansible, pi-devbox, pi-extensions, pi-toolkit, cli_utils, proxmox) the same day. (commit `90e5a1f`)
+- **First release that exercises both the pinned-crane install (T14, v1.15.3) and the skip-promote-on-cache-hit guard (T15, v1.15.4) on this CI run path** — still cache-hit on base, so `promote-base-latest` should remain skipped via T15 and the pinned crane install will only fire when a real base rebuild happens.
+
+## v1.15.4b — 2026-05-18
+
+Recovery release for v1.15.4 — the `omos-with-pi` variant landed at >3500 MB and tripped the smoke threshold, so `smoke-omos-with-pi` and `build-variant-omos-with-pi` were skipped. The other three variants (base, omos, with-pi) published cleanly. Plus a latent workflow bug fix exposed by the partial publish.
+
+- **Smoke threshold bump:** `omos-with-pi` 3500 → 3700 MB. Compounded growth: opencode 1.15.0 → 1.15.4 (4 patch versions) plus pi 0.74.0 → 0.75.3 (minor + 3 patches) both added a few MB each, and they sum in the omos-with-pi variant. Same pattern as previous threshold bumps (v1.14.31c, v1.15.0b); restores ~150 MB headroom.
+- **Workflow fix — `update-description` no longer skips on partial publish.** Pre-existing latent bug: `update-description.needs` includes all four `build-variant-*` jobs, and gitea Actions' default behavior is "skipped need ⇒ skip dependent". When `build-variant-omos-with-pi` got skipped (because its smoke failed), `update-description` cascaded into a skip even though the job's `if:` condition (`tag pushed`) was true. Result: Hub description wasn't refreshed on v1.15.4 despite three variants publishing. Fix: wrap the `if:` in `always() && needs.build-variant-base.result == 'success' && ...` so the job runs as long as the base variant published, regardless of what other variants did.
+- **Same fix applied to `promote-base-latest`** — had the identical latent bug. Currently masked by the cache-hit skip, but would have surfaced on a real-base-rebuild release with a single failed variant.
+- No image-side changes from v1.15.4. Cache hit on the same base hash (`base-35ee5fe7861a`).
+
+## v1.15.4 — 2026-05-18
+
+opencode 1.15.3 → 1.15.4 bump (one upstream patch release), bundled with the CI hardening that landed on main between v1.15.3 and now.
+
+- **Bump:** opencode 1.15.3 → 1.15.4 (`OPENCODE_VERSION` in `Dockerfile.variant`).
+- **CI: pinned crane install in `promote-base-latest`.** Replaced `imjasonh/setup-crane@v0.4` with a direct `curl + tar` install pinned to crane v0.21.6. The action's bootstrap script calls `api.github.com/.../releases/latest` to discover what crane version to install. That call periodically rate-limits and produces `tag=null` → the action downloads `releases/download/null/...` → 404 → `gzip: unexpected end of file` → exit 2. We hit this on v1.15.3 (cosmetic failure since base-latest was already correct from cache hit). Pinned install removes the runtime GitHub API dependency entirely. Bump `CRANE_VERSION` deliberately when wanting updates, same pattern as the other GitHub-sourced binaries in the Dockerfile layer.
+- **CI: skip `promote-base-latest` on cache-hit base builds.** When the base layer hash hasn't changed (cache-hit on the existing `base-<hash>` from a previous run), `base-latest` already points at the correct digest, so the retag is a tautology. Job now skipped entirely when `needs.base-decide.outputs.need_build == 'false'`. Manual `workflow_dispatch` with `promote_latest: true` overrides the gate as an escape hatch for hand-recovery scenarios.
+- No image-side changes from the v1.15.3 baseline beyond the opencode npm version. Smoke thresholds unchanged.
+
+## v1.15.3 — 2026-05-16
+
+opencode 1.15.0 → 1.15.3 bump (three upstream patch releases).
+
+- **Bump:** opencode 1.15.0 → 1.15.3 (`OPENCODE_VERSION` in `Dockerfile.variant`).
+- No container-side changes. Smoke thresholds from v1.15.0b unchanged.
+
+## v1.15.0b — 2026-05-15
+
+Rebuild of v1.15.0 with one fix — v1.15.0's `omos` variant landed at 3206 MB, 6 MB over the 3200 MB smoke threshold, so `smoke-omos` failed and `build-variant-omos` was skipped. opencode 1.15.0 grew slightly vs 1.14.50, leaving zero headroom on the existing threshold.
+
+- **Smoke threshold bump:** `omos` 3200 → 3300 MB, `omos-with-pi` 3400 → 3500 MB. Restores ~100 MB headroom for routine apt-get upgrade drift between releases. Documented inline in `scripts/smoke-test.sh`. No image-side changes — cache hits across the board, just a re-publish on the bumped threshold.
+
+## v1.15.0 — 2026-05-15
+
+opencode 1.14.50 → 1.15.0 bump (upstream minor release).
+
+- **Bump:** opencode 1.14.50 → 1.15.0 (`OPENCODE_VERSION` in `Dockerfile.variant`).
+- **Resilience:** `git clone` for pi-toolkit and pi-extensions in `Dockerfile.variant` is now wrapped in a 5-attempt retry loop with linear backoff (5s, 10s, 15s, 20s, 25s = up to ~75s total). gitea.jordbo.se occasionally returns transient HTTP 500s on the first request after idle, which previously broke the with-pi and omos-with-pi variant builds. Same pattern landed in pi-devbox repo concurrently.
+- **Docs:** `DOCKER_HUB.md` mentions `joakimp/pi-devbox` as a sibling image — the pi-only build that uses this image's base layer as its parent. Generator template (`scripts/generate-dockerhub-md.py`) updated and regenerated. Hub size: 5905 bytes (well under the 25 kB limit).
+- **Recovery from v1.14.50c partial publish:** the `latest-omos`, `v1.14.50c-omos` Hub gap is closed by this release — `latest-omos` will move forward to v1.15.0 once all four variants publish cleanly. Users on the floating tag were unaffected (still pointing at v1.14.41b until now).
+
+## v1.14.50c — 2026-05-14
+
+Recovery release for v1.14.50b's missing variants. v1.14.50b shipped only the `base` variant; `omos`, `with-pi`, and `omos-with-pi` were lost to a runner-fleet incident (see postmortem below).
+
+No container-side changes. This is a tag-only retag to re-run the build on a now-healthy runner fleet. Same `base-35ee5fe7861a` from v1.14.50b is reused via hash-cache hit; only the four variant deltas are rebuilt and published.
+
+### Postmortem: v1.14.50 / v1.14.50b runner-fleet incident
+
+Two orthogonal runner-host issues compounded across runs 285–291:
+
+1. **AVX-less runner shadowing the new fleet.** A pre-migration `act_runner` container on `nyvaken` (Sandy Bridge E3-12xx, has AVX but no AVX2; 4 weeks old, name `act_runner-runner-1`) collided with the orchestrator's freshly deployed `runner-1` VM (Broadwell-EP host, fully AVX2-capable). Gitea scheduled jobs to both. Jobs landing on the nyvaken container `npm install -g opencode-ai@1.14.50` succeeded, then ran `opencode --version` postinstall → the bundled Bun (v1.3.13 baseline) emitted `CPU lacks AVX support`, panicked, and SIGILLed (exit code 132).
+2. **Containerd shared-state race at `capacity: 2`.** The new VM-based runners initially ran `act_runner` with `capacity: 2`, scheduling two concurrent jobs on a single host. Both jobs would invoke `docker/setup-buildx-action@v4`, which pulls `moby/buildkit:buildx-stable-1`. Containerd's content store raced on identical sha256 ingestion, surfacing as `commit failed: rename .../ingest/.../data .../blobs/sha256/...: no such file or directory` or `failed to extract layer: failed to Lchown ...`.
+
+A secondary issue surfaced: **Proxmox VM `cpu:` field defaults mask AVX**. The newly-cloned runner VMs had no explicit `cpu:` line in `qm config` and inherited Proxmox's recent default `x86-64-v2-AES`, which excludes AVX even though the Broadwell-EP host silicon has full `avx2`. Fix: `qm set <vmid> --cpu x86-64-v3` (or `host` for full passthrough), then `qm shutdown` + `qm start` (live reboot is not enough). Verified inside guest with `grep -m1 -oE 'avx[2]?' /proc/cpuinfo`.
+
+Additionally, when `promote-base-latest`'s `needs:` graph requires *all four* `build-variant-*` jobs to succeed, partial publishes leave the `base-latest` Hub alias never advancing. Workaround used during recovery: manually re-tag the new base hash via Docker Hub registry manifest API (`PUT /v2/<repo>/manifests/base-latest` with the body of `GET /v2/<repo>/manifests/base-<sha>`) using a granular Hub PAT. No blob copy needed since blobs are content-addressed.
+
+### Recovery actions taken (orchestrator + this repo)
+
+- Orchestrator (cloud-init + ansible repos): set explicit `cpu_type: x86-64-v3` in all runner host yaml files; provision.sh now applies `qm set --cpu` after clone; added runner-3 on proxmox003 for anti-affinity (one runner per Proxmox node); dropped `capacity: 2 → 1` on all runners; bumped `act_runner` 0.3.1 → 0.6.1 across the fleet; documented the CPU-type gotcha as gotcha #9 in cloud-init AGENTS.md and a section in proxmox-guide.md.
+- User: retired the legacy `act_runner-runner-1` container on nyvaken; cleaned up stale runner registrations in Gitea Site Admin → Actions → Runners.
+- This repo: no changes needed in Dockerfile.base / Dockerfile.variant; v1.14.50c is a tag-only retag.
+
+### Fleet state at v1.14.50c
+
+3 runners (runner-1@proxmox001, runner-2@proxmox002, runner-3@proxmox003), all `act_runner` v0.6.1, all `capacity: 1`, all expose AVX + AVX2 to the guest. No name collisions. Estimated wall clock for v1.14.50c (cache-hit base, 4 variant deltas across 3 runners with capacity:1): ~40–50 min.
+
+## v1.14.50b — 2026-05-14
+
+Rebuild of v1.14.50 with two fixes — the v1.14.50 release was incomplete (smokes failed under containerd contention; build-variant jobs skipped; base-latest never promoted to Docker Hub).
+
+- **Force fresh base rebuild.** Added a `BASE_REBUILD_DATE` comment header to `Dockerfile.base` to invalidate the content hash and trigger a full base rebuild. Picks up ~5 days of Debian trixie security updates and other apt-tracked packages. The comment also documents the pattern for future intentional base-rebuilds without other code changes (recommended cadence: once per release).
+- **First publish of `base-latest` alias.** `promote-base-latest` runs unconditionally on tag push (`PROMOTE_LATEST=true`), so this release is the first to put `joakimp/opencode-devbox:base-latest` on Docker Hub. Required before pi-devbox (and any other downstream image FROMing the base) can build.
+
+## v1.14.50 — 2026-05-14
+
+opencode 1.14.44 → 1.14.50 bump. First release on the split-base build pipeline.
+
+- **Bump:** opencode 1.14.44 → 1.14.50 (`OPENCODE_VERSION` in `Dockerfile.variant`).
+- **Infrastructure: split-base pipeline cutover.** `Dockerfile.base` + `Dockerfile.variant` replace the single `Dockerfile`. `docker-publish-split.yml` (now renamed to `docker-publish.yml` in spirit — triggers on `push: tags: v*`) replaces the old `docker-publish.yml`. The original `Dockerfile` and `docker-publish.yml` are deleted. Hash-driven base reuse: version-bump-only releases skip the base build entirely (~40–80 min wall clock with 4 runners vs ~165–180 min previously). Validated across two `workflow_dispatch` test runs (`:v0.0.0-split-test` tags on Docker Hub).
+- **Fix:** `echo -e` heredoc replaced with POSIX-compatible brace-block for multiline `$GITHUB_OUTPUT` writes in the four `build-variant-*` jobs. `echo -e` does not interpret `\n` in `/bin/sh` (dash), causing `steps.tags.outputs.tags` to be empty and buildx to fail with "tag is needed when pushing to registry".
+- **Docs:** New `.gitea/README.md` — architectural overview of the split-base pipeline, hash logic, wall-clock estimates, runner expectations, and the migration plan.
+
+## v1.14.44 — 2026-05-09
+
+opencode 1.14.42 → 1.14.44 bump (1.14.43 skipped upstream). Also completes the matrix coverage that v1.14.42 missed: `build-omos-with-pi` failed mid-publish on v1.14.42 due to an upstream npm CDN propagation race — `oh-my-opencode-slim@1.0.7` had been published declaring a dependency on `@opencode-ai/sdk@1.14.44`, and our build hit the registry within ~2 minutes of that SDK version landing, before the tarball had propagated across npm's CDN. The build returned 404 on the SDK fetch even though the manifest's `dist-tags.latest` already pointed at 1.14.44. Tarball is now fully fetchable; v1.14.44 builds cleanly across all four variants.
+
+- **Bump:** opencode 1.14.42 → 1.14.44 (`OPENCODE_VERSION` build-arg default in both `Dockerfile` and `Dockerfile.variant`).
+
+Known gap: `joakimp/opencode-devbox:v1.14.42-omos-with-pi` and the corresponding `latest-omos-with-pi` alias were NOT published in the v1.14.42 release (`build-omos-with-pi` job failed for the reason above). `latest-omos-with-pi` continued pointing at v1.14.41b until v1.14.44 published. Users on the `latest-omos-with-pi` floating tag were unaffected; users pulling explicit `:v1.14.42-omos-with-pi` would get a 404 from Hub. Closed by v1.14.44.
+
+## v1.14.42 — 2026-05-09
+
+**Note:** Of the 4 multi-arch variants, 3 published cleanly (`v1.14.42`, `v1.14.42-omos`, `v1.14.42-with-pi`, plus their `latest*` aliases). `build-omos-with-pi` failed during the publish step due to an upstream npm CDN propagation race (see v1.14.44 entry above for detail). Re-running the failed job would have required another full ~3h matrix rerun in gitea Actions; we chose to bump opencode to 1.14.44 instead and let the next tag close the gap.
+
+opencode 1.14.41 → 1.14.42 bump. Carries along all container-side changes accumulated since v1.14.41b: pi package rename to `@earendil-works/*`, npm-prefix-on-volume fix, Hub doc rewrite, README/AGENTS docs catchup.
+
+Image changes:
+
+- **Bump:** opencode 1.14.41 → 1.14.42 (`OPENCODE_VERSION` build-arg default in both `Dockerfile` and `Dockerfile.variant`).
+- **Rename:** `npm install -g @mariozechner/pi-coding-agent` -> `npm install -g @earendil-works/pi-coding-agent` in the `INSTALL_PI=true` build path. Pi moved to its new home at earendil-works on 2026-05-07 (https://pi.dev/news/2026/5/7/pi-has-a-new-home); the old `@mariozechner/*` packages are deprecated on npm with the explicit message 'please use @earendil-works/pi-coding-agent instead going forward', and the version stream has moved on (old top-out 0.73.1; new currently 0.74.0). Anyone npm-installing the old name today gets a deprecation warning + a stale binary. Affects both `Dockerfile` (production single-Dockerfile path) and `Dockerfile.variant` (split-base path on main). README, AGENTS, and `HUB_TEMPLATE` URL refs updated from `github.com/mariozechner/pi-coding-agent` (which now 404s) to `github.com/earendil-works/pi`. Brew install references (`brew install pi-coding-agent`) left as-is: formula still works at 0.73.1 and a homebrew tap update is tracked upstream at earendil-works/pi#2755.
+- **Fix:** `pi install npm:<pkg>` (and any `npm install -g`) by the `developer` user no longer EACCES against the system npm prefix. `NPM_CONFIG_PREFIX` is now `/home/developer/.pi/npm-global` and the prefix's `bin/` is prepended to `PATH`. The directory lives on the `devbox-pi-config` named volume, so user-installed pi packages (themes, skills, extensions) survive container recreation and image rebuilds. Build-time `npm install -g` calls (opencode, pi, oh-my-opencode-slim) are unaffected because the new ENVs are declared after those steps in the Dockerfile, so the baked binaries still install to `/usr` and are not shadowed by the volume mount.
+- **Fix (smoke-test):** `scripts/smoke-test.sh` `oh-my-opencode-slim` check now invokes `npm ls -g` with `NPM_CONFIG_PREFIX=/usr` so it queries the system prefix where the baked install lives. Latent regression from the npm-prefix fix above: default `npm ls -g` started querying the user prefix (`/home/developer/.pi/npm-global`, empty at build time) and missed the baked OMOS install — surfaced when `validate.yml` ran on main after the merge of `feat/split-build`.
+
+Docs:
+
+- **Docs:** `DOCKER_HUB.md` `Image Variants` table now lists all four published variants (`latest`, `latest-omos`, `latest-with-pi`, `latest-omos-with-pi`) instead of only the first two. Generator (`scripts/generate-dockerhub-md.py`) HEADER updated to match.
+- **Docs:** `DOCKER_HUB.md` is now generated from a hand-maintained `HUB_TEMPLATE` constant in `scripts/generate-dockerhub-md.py` instead of a section-by-section transformation of `README.md`. Drops from 24 997 bytes (3 byte headroom) to ~5.5 kB (~78% headroom). The old derive-from-README mechanism (`SECTION_RULES`, `TRIM_SUBSECTIONS`, `REPLACEMENTS`, `split_sections`, `trim_subsections`) is gone — README and Hub doc are now independent surfaces, and most README edits no longer require regenerating `DOCKER_HUB.md`. Trade-off: image-variants table and quick-start flow are now coupled to `HUB_TEMPLATE` and need a manual edit when they change.
+- **Docs:** README pi section gains a `### Setup` paragraph mentioning the prebuilt `latest-with-pi` and `latest-omos-with-pi` Docker Hub tags, mirroring the OMOS section's `latest-omos` mention. "What gets installed" updated to reflect the actual shipped state: 7 pi-extensions (was stale at 6 — mcp-loader was added in pi-extensions but not propagated here), each with a one-line description; mcp-loader gets a paragraph covering its dual-transport (local stdio + remote streamable-HTTP per MCP spec 2025-03-26) capability and the `/mcp` slash command. Clarified that the mempalace bridge is a separate MCP entry point that coexists with mcp-loader rather than being replaced by it.
+- **Docs:** AGENTS.md tag-scheme paragraph corrected from "four Docker Hub tags per release" to eight (the v1.14.41b CI matrix expansion). "Documentation coupling on release" rule updated — README edits no longer require regenerating `DOCKER_HUB.md`. Release-day checklist tightened.
+- **README pi section:** "What gets installed" sub-section updated to reflect the actual shipped state. Was stale: claimed 6 pi-extensions (actually 7 — mcp-loader was added in pi-extensions commit 141bf64 / 7eec49b / 37cc49e but never propagated here). Each extension now has a one-line description; mcp-loader gets a paragraph covering its dual-transport (local stdio + remote streamable-HTTP per MCP spec 2025-03-26) capability and the `/mcp` slash command. Clarified that the mempalace bridge is a separate MCP entry point that coexists with mcp-loader rather than being replaced by it. Added an explicit note that no MCP servers are baked in beyond mempalace — the loader is opt-in via settings.json edits.
+
+## v1.14.41b — 2026-05-08
+
+**Optional pi as second harness.**
+
+- **Feature:** New `INSTALL_PI=true` build arg installs [pi](https://github.com/earendil-works/pi) as an alternative or complementary harness alongside opencode. Both harnesses share the same mempalace install and palace path — wing/diary entries are mutually visible. Adds ~150 MB to the image. Pi version pinned by `PI_VERSION` (default: latest at build time); `pi update` inside the container does not persist across `--rm` containers — image rebuild is the upgrade path, same contract as `OPENCODE_VERSION`.
+- **Feature:** New `INSTALL_OPENCODE=false` build arg builds an image without opencode (e.g. for pi-only use). Default remains `true`. Existing builds and tags are unaffected.
+- **Feature:** New `devbox-pi-config` named volume mounted at `~/.pi/` persists pi user state (settings.json, `/ext`-disabled extensions) across container recreate. Mirrors the `devbox-opencode-config` pattern from v1.14.33.
+- **Feature:** Container clones [pi-toolkit](https://gitea.jordbo.se/joakimp/pi-toolkit) (keybindings, env loader, settings template) and [pi-extensions](https://gitea.jordbo.se/joakimp/pi-extensions) (6 extensions including ext-toggle, todo, ssh-controlmaster, notify, git-checkpoint, confirm-destructive) into `/opt/` at build time. New `PI_TOOLKIT_REF` and `PI_EXTENSIONS_REF` build args (default `main`) pin git refs. The mempalace pi-bridge `mempalace.ts` is symlinked from the existing `/opt/mempalace-toolkit/` clone.
+- **Behavior change:** Default container CMD changed from `["opencode"]` to `["bash", "-l"]`. `docker compose run --rm devbox` (no command) now drops to a login shell so users can pick `opencode` or `pi` (or run `aws sso login` first). To preserve the old behavior, pass the harness explicitly: `docker compose run --rm devbox opencode`. `docker compose exec` workflows are unaffected (they bypass the entrypoint and CMD).
+- **Performance:** chromadb's all-MiniLM-L6-v2 ONNX embedding model (~80 MB) is now pre-warmed at image build time under `~/.cache/chroma/onnx_models/`. Without this, mempalace's `init` step in entrypoint-user.sh would download the model silently on first container start (suppressed via `>/dev/null 2>&1`), stalling startup by minutes on a fresh image. Pre-warming runs as `gosu developer` so the cache lands at the right path and is owned by the runtime user.
+- **Bugfix:** entrypoint-user.sh now redirects stdin from `/dev/null` for the `mempalace init --yes` call. Without this, the interactive `Mine this directory now? [Y/n]` prompt at the end of init would silently block forever when the container was started with `docker run -it` (TTY keeps stdin open). EOF on stdin makes the prompt fall through to its default.
+- **Smoke-test:** New `--variant with-pi` (threshold 2700 MB) and `--variant omos-with-pi` (3400 MB). Pi-specific assertions verify pi binary, pi-toolkit clone, pi-extensions clone, deployed keybindings symlink, extension count ≥ 4, mempalace bridge symlink, and settings.json bootstrap. Pi state assertions use `docker exec` from the host (not `run`-inside-container) since the container has no docker CLI.
+- **CI:** `.gitea/workflows/{validate,docker-publish}.yml` extended with `with-pi` and `omos-with-pi` matrix entries. Each release now produces eight Docker Hub tags: `vX.Y.Z[n]`, `latest`, `vX.Y.Z[n]-omos`, `latest-omos`, `vX.Y.Z[n]-with-pi`, `latest-with-pi`, `vX.Y.Z[n]-omos-with-pi`, `latest-omos-with-pi`.
+- **Docs:** README adds a "pi (alternative/complementary harness)" section. AGENTS.md codifies pi install contract, deploy ordering in entrypoint-user.sh, and rationale for not calling mempalace-toolkit's full `install.sh` from container.
+
 ## v1.14.41 — 2026-05-08
 
 Bump opencode to 1.14.41.

DOCKER_HUB.md

@@ -1,22 +1,37 @@
-# opencode-devbox — Docker Hub
+# opencode-devbox
 
 Portable AI developer environment for [opencode](https://opencode.ai). Debian-based, with git, SSH, Node.js, AWS CLI v2, and common dev tools pre-installed.
 
-## Image Variants
+Designed for teams who want a reproducible coding-agent setup that runs the same on every laptop and CI runner — without forcing each developer to install Bun, Node, AWS CLI, mempalace, or maintain shell config drift across machines.
 
-Two image variants are published for each release:
+## Image Variants
 
 | Tag | Description |
 |---|---|
 | `latest` / `vX.Y.Z` | Base image — opencode, Node.js, AWS CLI, dev tools |
 | `latest-omos` / `vX.Y.Z-omos` | Base + [oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim) multi-agent orchestration and Bun |
+| `latest-with-pi` / `vX.Y.Z-with-pi` | Base + [pi](https://github.com/earendil-works/pi) as alternative/complementary harness (shares the mempalace install with opencode) |
+| `latest-omos-with-pi` / `vX.Y.Z-omos-with-pi` | OMOS + pi together |
 
-Both variants support `linux/amd64` and `linux/arm64`.
-
-> **NOTE:** This file is auto-generated from `README.md` by `scripts/generate-dockerhub-md.py`. Edit README.md and regenerate rather than editing this file directly.
+All variants support `linux/amd64` and `linux/arm64`.
 
 ## Quick Start
 
+For a fully-configured environment with persistent state (opencode config, mempalace memory, neovim plugins, bash history) surviving container recreation, use docker-compose. **You don't need to clone the repo** — just grab two template files:
+
+```bash
+mkdir -p ~/opencode-devbox && cd ~/opencode-devbox
+curl -O https://gitea.jordbo.se/joakimp/opencode-devbox/raw/branch/main/docker-compose.yml
+curl -fsSL https://gitea.jordbo.se/joakimp/opencode-devbox/raw/branch/main/.env.example -o .env
+# Edit .env — set OPENCODE_PROVIDER, the matching API key,
+# WORKSPACE_PATH, GIT_USER_NAME, GIT_USER_EMAIL.
+docker compose run --rm devbox
+```
+
+This drops you straight into opencode with your project mounted at `/workspace`. Use `bash` as the command (e.g. `docker compose run --rm devbox bash`) to land in a shell first — useful for `aws sso login`, `pi` (on `*-with-pi` variants), or multi-harness workflows.
+
+**One-shot run, no persistence:**
+
 ```bash
 docker run -it --rm \
   -e ANTHROPIC_API_KEY=your-key \
@@ -28,538 +43,57 @@ docker run -it --rm \
   joakimp/opencode-devbox:latest
 ```
 
-This drops you straight into opencode with your project mounted at `/workspace`.
+Full setup guide — authentication for each provider (Anthropic, OpenAI, Bedrock SSO + static), persistence model, build args, troubleshooting: <https://gitea.jordbo.se/joakimp/opencode-devbox#readme>
 
-For an interactive shell first (useful for AWS SSO login):
+## What's Inside
 
-```bash
-docker run -it --rm \
-  -e ANTHROPIC_API_KEY=your-key \
-  -e OPENCODE_PROVIDER=anthropic \
-  -v ~/projects:/workspace \
-  -v ~/.ssh:/home/developer/.ssh:ro \
-  joakimp/opencode-devbox:latest bash
-```
+- **[opencode](https://opencode.ai)** — primary coding-agent harness. Multi-provider (Anthropic, OpenAI, Bedrock, Google, Groq, etc.).
+- **[pi](https://github.com/earendil-works/pi)** *(in `*-with-pi` variants)* — lightweight TUI coding-agent that coexists with opencode and shares the same mempalace install. Includes the `mcp-loader` extension so any local-stdio or remote streamable-HTTP MCP server (searxng, gitea, context7, …) can be added by editing `~/.pi/agent/settings.json`.
+- **[mempalace](https://github.com/MemPalace/mempalace)** — persistent AI memory layer (ChromaDB + SQLite). Wing/diary/knowledge-graph entries are mutually visible to opencode and pi.
+- **[oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim)** *(in `*-omos` variants)* — multi-agent orchestration on top of opencode (council, fallback chains, named agents).
+- **AWS CLI v2** with SSO support, **Node.js LTS**, **Bun** (OMOS variants), **uv** (Python), **gosu** for clean UID/GID adjustment to match your host workspace.
+- **MCP wrappers** for mempalace pre-installed and pre-wired to both harnesses.
 
-Then run `opencode` when ready.
+## Authentication
 
-For docker-compose users, see the source repo for `docker-compose.yml` and `.env.example` templates.
+The container reads provider credentials from environment variables and host-mounted config:
 
-## Features
+- **Anthropic / OpenAI / Groq / others:** set `OPENCODE_PROVIDER` and the corresponding `*_API_KEY` via `-e` or `.env`.
+- **AWS Bedrock (SSO):** mount `~/.aws` from the host, `OPENCODE_PROVIDER=amazon-bedrock`, then `aws sso login` inside the container. Tokens persist across container restarts via the host bind-mount.
+- **OAuth / device-code providers:** auth state lives in opencode's config, which is persisted via the `devbox-opencode-config` named volume.
 
-- **Debian trixie** base — glibc, full PTY/terminal support
-- **Configurable providers** — Anthropic, OpenAI, AWS Bedrock via env vars
-- **Host filesystem access** — bind mount any directory as `/workspace`
-- **SSH key forwarding** — git push/pull to private repos
-- **MCP server support** — Node.js included for `npx`-based MCP servers
-- **Non-root user** — runs as `developer` with UID auto-matched to workspace owner (sudo available)
-- **Python via uv** — `uv` package manager included; install Python on demand with `uv python install`
-- **Rust via rustup** — `rustup-init` included; bootstrap Rust on demand with `rustup-init -y`
-- **Optional runtimes** — Python (apt), Go via build args (Node.js always included — required for opencode v1.x)
-- **Multi-agent orchestration** — optional [oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim) integration via build arg
-- **AWS CLI v2** — built-in SSO/Bedrock authentication with headless device-code flow
-- **Multi-arch** — amd64 and arm64
+Full Bedrock walkthrough (IAM roles, permissions, multi-account setups): see the [AWS Bedrock Authentication](
+https://gitea.jordbo.se/joakimp/opencode-devbox#aws-bedrock-authentication
+) section on gitea.
 
-## Usage
+## Persistence
 
-### Prerequisites
-
-Bind-mounted directories must exist on the host before starting the container. Docker creates missing directories as root-owned, which causes permission issues.
-
-```bash
-# Required: workspace for your projects
-mkdir -p ~/projects
-```
-
-### Connecting to the container
-
-From your laptop, SSH into the remote server where Docker is running, then start the container:
-
-```bash
-# 1. SSH into the remote server
-ssh user@remote-server
-
-# 2. Navigate to the project
-cd opencode-devbox
-
-# 3. Start the container with an interactive shell
-docker compose run --rm devbox bash
-
-# You're now inside the container — run commands here
-aws sso login --sso-session <your-sso-session> --use-device-code
-opencode
-```
-
-### Running modes
-
-**Interactive shell** — enter the container, run multiple commands:
-```bash
-docker compose run --rm devbox bash
-```
-
-**Direct to opencode** — skips the shell, launches opencode immediately:
-```bash
-docker compose run --rm devbox
-```
-
-**Background container** — keep it running, attach when needed:
-```bash
-# Start in background
-docker compose up -d
-
-# Attach a shell to the running container
-docker compose exec -u developer devbox bash
-
-# Or run a single command inside it
-docker compose exec -u developer devbox aws --version
-```
-
-> `run` creates a new container (cleaned up with `--rm`). `exec` attaches to an already running one.
-
-## Configuration
-
-### Environment Variables
-
-| Variable | Description | Default |
+| Volume | Mount | Survives |
 |---|---|---|
-| `OPENCODE_PROVIDER` | LLM provider (`anthropic`, `openai`, `amazon-bedrock`) | `anthropic` |
-| `OPENCODE_MODEL` | Model override | Provider default |
-| `ANTHROPIC_API_KEY` | Anthropic API key | — |
-| `OPENAI_API_KEY` | OpenAI API key | — |
-| `AWS_REGION` | AWS region for Bedrock | `us-east-1` |
-| `AWS_PROFILE` | AWS SSO profile name | `default` |
-| `GIT_USER_NAME` | Git commit author name | — |
-| `GIT_USER_EMAIL` | Git commit author email | — |
-| `WORKSPACE_PATH` | Host path to mount | `.` |
-| `SSH_KEY_PATH` | Host SSH key directory | `~/.ssh` |
-| `USER_UID` | Override container user UID | Auto-detect from `/workspace` |
-| `USER_GID` | Override container user GID | Auto-detect from `/workspace` |
-| `LANG` | System locale | `en_US.UTF-8` |
-| `LANGUAGE` | Language priority list | `en_US:en` |
-| `LC_ALL` | Override all locale settings | `en_US.UTF-8` |
-| `EDITOR` | Default text editor | `nvim` |
-| `ENABLE_OMOS` | Enable oh-my-opencode-slim multi-agent orchestration | `false` |
-| `OMOS_TMUX` | Enable tmux pane integration for OMOS | `false` |
-| `OMOS_SKILLS` | Install OMOS recommended skills on first run | `true` |
-| `OMOS_RESET` | Force regenerate OMOS config on next start | `false` |
-| `SKILLSET_CONTAINER_PATH` | Path to skillset repo inside container (for auto-deploy when not at /workspace/skillset) | Auto-detect |
+| `devbox-opencode-config` | `~/.config/opencode` | container recreate, image rebuild |
+| `devbox-pi-config` | `~/.pi` | container recreate, image rebuild — incl. user-installed pi packages via `pi install` (`NPM_CONFIG_PREFIX` points into the volume) |
+| `devbox-palace` (uncomment) | `~/.mempalace` | container recreate, image rebuild — palace data is precious, treat as primary storage |
+| `devbox-chroma-cache` | `~/.cache/chroma` | container recreate (model cache, disposable — re-downloads in seconds) |
 
-### Custom opencode config
+Workspace bind-mount (`/workspace`) is your project directory on the host, so source code is never inside the container.
 
-Opencode configuration is persisted automatically via the named volume `devbox-opencode-config`. This volume is mounted at `/home/developer/.config/opencode` by default — no host directory setup required. All changes to `opencode.jsonc`, skills, and (on the OMOS variant) `oh-my-opencode-slim.json` survive container recreation.
+Full persistence reference, including multi-user (`SIGNUM`) isolation and host bind-mount alternatives: see the [README on gitea](https://gitea.jordbo.se/joakimp/opencode-devbox#persistence).
 
-When an existing `opencode.jsonc` is found in the volume, the `OPENCODE_PROVIDER` auto-config is skipped.
+## Where to Go Next
 
-**Alternative: host bind-mount** — if you specifically want to share config from the host (e.g. to version-control it or sync across machines), replace the named volume with a bind mount:
+- **Full README** with build args, every feature in detail, troubleshooting: <https://gitea.jordbo.se/joakimp/opencode-devbox>
+- **CHANGELOG** for version history: <https://gitea.jordbo.se/joakimp/opencode-devbox/src/branch/main/CHANGELOG.md>
+- **Issues / source / docker-compose templates:** <https://gitea.jordbo.se/joakimp/opencode-devbox>
+- **Agent-facing internals** (for future maintainers / coding agents working in the repo): <https://gitea.jordbo.se/joakimp/opencode-devbox/src/branch/main/AGENTS.md>
 
-```yaml
-volumes:
-  - ~/.config/opencode:/home/developer/.config/opencode
-```
+## Sibling images
 
-> **Portability note:** The mounted config runs inside a Linux container. Any absolute paths inside `opencode.jsonc` (for example, host-specific `plugin` entries like `file:///usr/local/lib/node_modules/...` or `file:///opt/homebrew/...`) will not resolve inside the container. Prefer bare package specifiers (e.g. `"oh-my-opencode-slim"`) that resolve via `node_modules` lookup, which works on both macOS and Linux hosts.
+- **[`joakimp/pi-devbox`](https://hub.docker.com/r/joakimp/pi-devbox)** — pi-only image built on top of this image's base layer. Smaller (~700 MB) and version-tracks the [pi npm package](https://www.npmjs.com/package/@earendil-works/pi-coding-agent) directly. Use this if you want pi without opencode. Source: <https://gitea.jordbo.se/joakimp/pi-devbox>
 
-### Custom skills
+## License
 
-Skills are deployed automatically from a skillset repo on container start. The entrypoint detects the skillset location in this order:
+MIT. See <https://gitea.jordbo.se/joakimp/opencode-devbox/src/branch/main/LICENSE>.
 
-1. `SKILLSET_CONTAINER_PATH` env var (explicit path to skillset repo inside container)
-2. `~/skillset` mount (if present)
-3. `/workspace/skillset` fallback (if your workspace contains a `skillset/` directory)
+---
 
-When a skillset repo is detected, its skills are symlinked into `~/.agents/skills/` automatically. No manual configuration needed.
-
-> **Warning:** Do not bind-mount a host `~/.agents/skills` directory directly into the container. This conflicts with the symlink-based auto-deploy mechanism and causes broken skill references.
-
-### Neovim configuration
-
-The image includes neovim 0.12 with `EDITOR=nvim` set by default. To use your own neovim config (and have plugins auto-install via lazy.nvim on first start), mount it from the host:
-
-```yaml
-volumes:
-  - ~/.config/nvim:/home/developer/.config/nvim:ro
-```
-
-### Python development with uv
-
-The image includes Python 3.13 (from Debian Trixie) and [uv](https://docs.astral.sh/uv/), a fast Python package manager that replaces pip, venv, and pyenv:
-
-```bash
-# Python 3.13 is available out of the box
-python3 --version
-
-# Use uv for package management
-uv venv
-uv pip install -r requirements.txt
-
-# Or use uv's project workflow (reads pyproject.toml)
-uv sync
-
-# Run a Python script
-uv run python script.py
-
-# Install standalone Python tools
-uvx ruff check .
-
-# Install a newer Python version (persists with devbox-uv volume)
-uv python install 3.14
-```
-
-Python installations are stored in `~/.local/share/uv/`. To persist them across container restarts, add the `devbox-uv` named volume to your `docker-compose.yml`:
-
-```yaml
-volumes:
-  - devbox-uv:/home/developer/.local/share/uv
-
-volumes:
-  devbox-uv:
-```
-
-Project virtual environments (`.venv`) are stored in your workspace directory and persist automatically via the `/workspace` bind mount.
-
-### Rust development with rustup
-
-The image includes `rustup-init`, the Rust toolchain installer. Rust is not pre-installed but can be bootstrapped on demand:
-
-```bash
-# One-time setup: install Rust toolchain (~300MB, persists with volumes)
-rustup-init -y
-source ~/.cargo/env
-
-# Now use Rust normally
-cargo new my-project
-cargo build
-cargo run
-```
-
-To persist Rust toolchains and cargo data across container restarts, add named volumes to your `docker-compose.yml`:
-
-```yaml
-volumes:
-  - devbox-rustup:/home/developer/.rustup
-  - devbox-cargo:/home/developer/.cargo
-
-volumes:
-  devbox-rustup:
-  devbox-cargo:
-```
-
-### JavaScript and TypeScript
-
-The base image includes **Node.js 22** and **npm** — sufficient for most JavaScript and TypeScript development:
-
-```bash
-# Initialize a new project
-npm init -y
-
-# Install dependencies
-npm install
-
-# Run TypeScript (via tsx, ts-node, etc.)
-npx tsx src/index.ts
-
-# Use npx for one-off tools
-npx tsc --init
-```
-
-The OMOS image variant also includes **Bun**, a faster JavaScript runtime and package manager:
-
-```bash
-bun init
-bun install
-bun run src/index.ts
-```
-
-Node modules are stored in your project directory under `/workspace` and persist automatically.
-
-### VS Code integration
-
-VS Code can connect directly to a running opencode-devbox container for a full IDE experience with IntelliSense, debugging, and extensions running inside the container.
-
-**Local Docker (Docker running on your workstation):**
-
-1. Install the [Dev Containers](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-containers) extension
-2. Start the container: `docker compose up -d`
-3. In VS Code: `Ctrl+Shift+P` → "Dev Containers: Attach to Running Container" → select `opencode-devbox`
-
-**Remote Docker (Docker running on a remote server, e.g. via SSH):**
-
-1. Install the [Remote - SSH](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-ssh) and [Dev Containers](https://marketplace.visualstudio.com/items?itemName=ms-vscode-remote.remote-containers) extensions
-2. Connect to the remote host: `Ctrl+Shift+P` → "Remote-SSH: Connect to Host"
-3. On the remote host, start the container: `docker compose up -d`
-4. In VS Code (now connected to the remote): `Ctrl+Shift+P` → "Dev Containers: Attach to Running Container"
-
-VS Code extensions installed inside the container persist as long as the container exists (not removed with `docker compose down`). For persistent extension storage across container recreations, add a named volume:
-
-```yaml
-volumes:
-  - devbox-vscode:/home/developer/.vscode-server
-```
-
-## oh-my-opencode-slim (Multi-Agent Orchestration)
-
-[oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim) adds a multi-agent layer on top of opencode — an Orchestrator delegates tasks to specialized agents (Explorer, Oracle, Librarian, Designer, Fixer), each configurable with different models and providers.
-
-### Setup
-
-A pre-built OMOS image is available on Docker Hub as `joakimp/opencode-devbox:latest-omos`. Alternatively, build from source:
-
-**1. Build the image with OMOS support:**
-
-```bash
-docker compose build --build-arg INSTALL_OMOS=true
-```
-
-This installs Bun and the oh-my-opencode-slim package into the image.
-
-**2. Enable in `.env`:**
-
-```bash
-ENABLE_OMOS=true
-```
-
-**3. Run as normal:**
-
-```bash
-docker compose run --rm devbox
-```
-
-On first start, the entrypoint runs the oh-my-opencode-slim installer in non-interactive mode. It generates agent configuration at `~/.config/opencode/oh-my-opencode-slim.json` inside the container. The default preset uses OpenAI models — edit the generated config or mount your own to customize.
-
-### OMOS Environment Variables
-
-| Variable | Default | Description |
-|---|---|---|
-| `ENABLE_OMOS` | `false` | Activate oh-my-opencode-slim on container start |
-| `OMOS_TMUX` | `false` | Enable tmux pane integration (tmux is included in the base image) |
-| `OMOS_SKILLS` | `true` | Install recommended skills (simplify, agent-browser, cartography) |
-| `OMOS_RESET` | `false` | Force regenerate config on next start (backs up existing config) |
-
-### Custom Configuration
-
-If you mount the opencode config directory (see Custom opencode config above), the `oh-my-opencode-slim.json` file is included and persists across restarts. Edit it directly to control which models power each agent, fallback chains, council setup, and more.
-
-See the [oh-my-opencode-slim configuration docs](https://github.com/alvinunreal/oh-my-opencode-slim/blob/master/docs/configuration.md) for the full reference.
-
-### Verifying Agents
-
-After starting opencode with OMOS enabled, run inside the opencode session:
-
-```
-ping all agents
-```
-
-All six agents should respond if your provider authentication is working.
-
-## AWS Bedrock Authentication
-
-When using AWS Bedrock as your LLM provider, you need:
-
-### 1. AWS config on the host
-
-The container needs access to your `~/.aws/config` with SSO session configuration. If you already have this on another machine, copy it:
-
-```bash
-scp -r user@other-machine:~/.aws ~/.aws
-```
-
-Or configure from scratch on the host:
-
-```bash
-aws configure sso
-```
-
-### 2. Mount `~/.aws` into the container
-
-Uncomment the AWS volume mount in `docker-compose.yml`:
-
-```yaml
-- ~/.aws:/home/developer/.aws
-```
-
-Note: do **not** use `:ro` — SSO writes token cache files to this directory.
-
-### 3. Authenticate inside the container
-
-Since the container runs headless (no browser), use the device-code flow:
-
-```bash
-# Start the container
-docker compose up -d
-docker compose exec -u developer devbox bash
-
-# Authenticate — prints a URL and code you open in your local browser
-aws sso login --sso-session <your-sso-session> --use-device-code
-
-# Once approved in the browser, start opencode
-opencode
-```
-
-The `--use-device-code` flag outputs a URL and short code instead of trying to open a browser. Copy the URL into any browser (on your laptop, phone, etc.), enter the code, and complete the 2FA flow. The CLI in the container picks up the session automatically.
-
-SSO sessions typically last 8–12 hours before requiring re-authentication. Since `~/.aws` is mounted from the host, tokens persist across container restarts.
-
-## MemPalace — persistent AI memory
-
-The image includes [MemPalace](https://github.com/MemPalace/mempalace), a local-first AI memory system that stores conversation history verbatim and retrieves it via semantic search. Nothing leaves your machine.
-
-> MemPalace adds ~300 MB to the image (chromadb, embedding model deps). If you don't use it, rebuild with `--build-arg INSTALL_MEMPALACE=false` to shrink the image.
-
-### Enabling persistence
-
-Uncomment the palace volume in `docker-compose.yml`:
-
-```yaml
-- devbox-palace:/home/developer/.mempalace
-```
-
-Without the volume, palace data lives in the container's writable layer and is lost on `--force-recreate`.
-
-### MCP integration with opencode
-
-Add mempalace as an MCP server in your `opencode.jsonc` (inside `~/.config/opencode/`):
-
-```json
-{
-  "mcp": {
-    "mempalace": {
-      "type": "local",
-      "command": ["mempalace-mcp"]
-    }
-  }
-}
-```
-
-> The image installs mempalace into an isolated `uv tool` venv at `/opt/uv-tools/mempalace/`. `uv tool install` places `mempalace-mcp` on `PATH` as a shim whose shebang points at the venv's Python, so MCP clients can invoke it as a normal binary without worrying about the venv. Do **not** use `["python3", "-m", "mempalace.mcp_server"]` — the system Python cannot import from the uv-managed venv and you'll get `ModuleNotFoundError` / `MCP error -32000: connection closed`.
-
-This gives opencode access to 29 MCP tools for searching memory, querying the knowledge graph, managing wings/rooms/drawers, and agent diaries.
-
-### Basic usage
-
-```bash
-# Mine project files into the palace
-mempalace mine /workspace
-
-# Mine conversation transcripts
-mempalace mine ~/.local/share/opencode/ --mode convos
-
-# Search memory
-mempalace search "why did we switch to eno1"
-
-# Load context for a new session
-mempalace wake-up
-```
-
-Each workspace gets its own isolated "wing" — memories never leak between projects.
-
-### Scheduled mining (mempalace-toolkit)
-
-The image bakes in [mempalace-toolkit](https://gitea.jordbo.se/joakimp/mempalace-toolkit), a small set of bash wrappers that pair with mempalace for two common routines:
-
-```bash
-# Mine opencode session history (reads ~/.local/share/opencode/opencode.db, stages JSONL, mines into wing_conversations)
-mempalace-session
-
-# Mine a project's docs into a dedicated wing
-mempalace-docs /workspace/my-project
-```
-
-Both wrappers are idempotent and dedup-aware — re-running them on unchanged input is a cheap no-op.
-
-For weekly automated runs, the toolkit ships ready-to-use scheduler templates (systemd user timer, launchd user agent, cron) in its [`contrib/`](https://gitea.jordbo.se/joakimp/mempalace-toolkit/src/branch/main/contrib) directory. The `*-devbox` variants are designed for this container: host-side schedulers that `docker exec` into the running opencode-devbox.
-
-Disable the toolkit (keeps mempalace itself) with `--build-arg INSTALL_MEMPALACE_TOOLKIT=false`. Pin to a specific ref with `--build-arg MEMPALACE_TOOLKIT_REF=v0.3.0` once tagged releases exist.
-
-### Storage
-
-Two separate named volumes keep different data classes apart:
-
-- **Palace data** (`~/.mempalace/`): ChromaDB vectors, SQLite knowledge graph, drawers. This is your memory — back it up, treat it as precious. Persists via the `devbox-palace` named volume.
-- **Embedding model cache** (`~/.cache/chroma/`): ONNX model (~79 MB), downloaded automatically on first search. Disposable — blow it away and it re-downloads in ~4 seconds. Persists via the `devbox-chroma-cache` named volume so you don't re-download on every container recreation.
-- **No API keys required** for core functionality (local embeddings via ONNX).
-
-Both volumes are commented out by default in `docker-compose.yml` — uncomment to enable:
-
-```yaml
-- devbox-palace:/home/developer/.mempalace
-- devbox-chroma-cache:/home/developer/.cache/chroma
-```
-
-**Air-gapped environments:** pre-populate the `devbox-chroma-cache` volume with the `all-MiniLM-L6-v2/` model contents. The palace volume needs no pre-population.
-
-## Gitea MCP server
-
-The image includes the [official Gitea MCP server](https://gitea.com/gitea/gitea-mcp) (`gitea-mcp`), providing 50+ MCP tools for interacting with self-hosted Gitea instances — repositories, issues, pull requests, releases, branches, wiki, and Actions.
-
-### Setup
-
-1. Create a Personal Access Token on your Gitea instance (Settings → Applications → Generate Token, scopes: `repo`, `read:user`).
-
-2. Add to your `.env`:
-   ```env
-   GITEA_HOST=https://your-gitea-instance.example.com
-   GITEA_ACCESS_TOKEN=your_token_here
-   ```
-
-3. Enable the gitea MCP server in your `opencode.jsonc`:
-   ```json
-   {
-     "mcp": {
-       "gitea": {
-         "type": "local",
-         "command": ["gitea-mcp", "-t", "stdio", "--host", "{env:GITEA_HOST}"],
-         "environment": {
-           "GITEA_ACCESS_TOKEN": "{env:GITEA_ACCESS_TOKEN}"
-         },
-         "enabled": true
-       }
-     }
-   }
-   ```
-
-The server is installed but disabled by default — it requires authentication to be useful.
-
-## Architecture
-
-```
-Host Machine
-├── ~/projects/my-app  ──bind mount──▶  /workspace (container)
-├── ~/.ssh             ──bind mount──▶  /home/developer/.ssh (ro)
-├── ~/.aws             ──bind mount──▶  /home/developer/.aws (Bedrock SSO)
-└── .env               ──env vars───▶  provider config + API keys
-
-Container (Debian trixie)
-├── opencode binary
-├── oh-my-opencode-slim (optional — multi-agent orchestration plugin, includes Bun)
-├── AWS CLI v2 (SSO + Bedrock auth)
-├── neovim 0.12, tmux, htop, bat, eza, zoxide, uv, rustup, make, gcc, g++, rsync
-├── git, git-crypt, age, ssh, ripgrep, fd, fzf, jq, curl, tree
-├── Node.js (for MCP servers)
-├── Bun (optional — included with oh-my-opencode-slim)
-├── entrypoint.sh (UID adjustment, git config, provider setup)
-└── /workspace ← your code lives here
-```
-
-### Data persistence
-
-| Path in container | Source | Survives `--rm`? | Contains |
-|---|---|---|---|
-| `/workspace` | Host bind mount | ✅ Yes | Your project files |
-| `/home/developer/.ssh` | Host bind mount (ro) | ✅ Yes | SSH keys |
-| `/home/developer/.aws` | Host bind mount (if configured) | ✅ Yes | AWS credentials/SSO cache |
-| `/home/developer/.local/share/opencode` | Named volume `devbox-data` | ✅ Yes | Session history, memory |
-| `/home/developer/.local/state/opencode` | Named volume `devbox-state` | ✅ Yes | TUI settings (theme, toggles) |
-| `/home/developer/.cache/bash` | Named volume `devbox-shell-history` | ✅ Yes | Bash history (`$HISTFILE`), survives container recreate |
-| `/home/developer/.local/share/zoxide` | Named volume `devbox-zoxide` | ✅ Yes | Zoxide directory history (`z <fragment>` jump targets) |
-| `/home/developer/.local/share/nvim` | Named volume `devbox-nvim-data` | ✅ Yes | Neovim plugins, Mason LSP installs, Lazy plugin cache |
-| `/home/developer/.local/share/uv` | Named volume `devbox-uv` (if configured) | ✅ Yes | Python installs, uv tool installs |
-| `/home/developer/.rustup` | Named volume `devbox-rustup` (if configured) | ✅ Yes | Rust toolchains |
-| `/home/developer/.cargo` | Named volume `devbox-cargo` (if configured) | ✅ Yes | Cargo binaries, registry cache |
-| `/home/developer/.vscode-server` | Named volume `devbox-vscode` (if configured) | ✅ Yes | VS Code server and extensions |
-| `/home/developer/.config/opencode` | Named volume `devbox-opencode-config` | ✅ Yes | `opencode.jsonc`, skills, plus `oh-my-opencode-slim.json` on the OMOS variant |
-
-**opencode config** (`opencode.jsonc`) is auto-generated from `OPENCODE_PROVIDER` on each start. It sets provider and model only — no MCP servers. To persist config changes and use custom settings, use the named volume (default) or bind-mount from host (see Custom opencode config above).
-
-## Source
-
-MIT licensed. Source, issues, and `docker-compose.yml` templates: <https://gitea.jordbo.se/joakimp/opencode-devbox>
+> This description is generated by `scripts/generate-dockerhub-md.py` from a hand-maintained template. Edit the template (not this file) and regenerate.

Dockerfile.base

@@ -1,14 +1,32 @@
-# opencode-devbox — portable AI dev environment
-# Debian-based container with opencode and configurable dev tools
+# opencode-devbox — base image (variant-independent layers)
+#
+# This Dockerfile produces an image tagged base-<hash>, used as the parent
+# for all four published variants (base, omos, with-pi, omos-with-pi).
+# It contains everything that does not depend on variant-specific
+# build-args (INSTALL_OPENCODE, INSTALL_OMOS, INSTALL_PI). The variant
+# Dockerfile (Dockerfile.variant) FROMs the base and adds only those
+# deltas.
+#
+# The base is rebuilt only when this file or anything it COPYs in
+# changes (rootfs/, entrypoint*.sh). Version bumps to OPENCODE_VERSION,
+# OMOS_VERSION, PI_VERSION, etc. do NOT trigger a base rebuild.
+#
+# To force a base rebuild for fresh apt packages without other code
+# changes, bump the BASE_REBUILD_DATE comment below. The hash is
+# content-addressed over this file, so any byte change invalidates the
+# cache. Recommended cadence: once per release for security updates.
+#
+# BASE_REBUILD_DATE: 2026-05-14 (v1.14.50b — fresh apt + first promote-base-latest)
+#
+# See the project README's "Build pipeline" section for the rationale.
 
 ARG DEBIAN_VERSION=trixie-slim
 FROM debian:${DEBIAN_VERSION} AS base
 
 ARG TARGETARCH
-ARG OPENCODE_VERSION=1.14.41
 
 LABEL maintainer="joakimp"
-LABEL description="Portable opencode developer container"
+LABEL description="opencode-devbox — base image (variant-independent)"
 LABEL org.opencontainers.image.source="https://gitea.jordbo.se/joakimp/opencode-devbox"
 
 # Avoid interactive prompts during build
@@ -58,16 +76,12 @@ RUN apt-get update && \
 # Version policy for the binaries below:
 #   • Default is `latest` — resolved at build time by following the
 #     /releases/latest redirect on GitHub and reading the tag from the
-#     Location header. This means every tagged image picks up the newest
+#     Location header. This means every base rebuild picks up the newest
 #     upstream release, with no risk of running months-old CVE-affected
 #     binaries.
 #   • Explicit pins still work: pass `--build-arg GOSU_VERSION=1.19` etc.
-#     Useful for reproducibility or rolling back a bad upstream release.
 #   • Resolved versions are printed during build and re-checked by the
 #     smoke test (scripts/smoke-test.sh), so drift is visible in CI logs.
-#
-# The helper `resolve_latest` reads the redirected tag (e.g. "v0.26.1")
-# and strips a leading "v" if present, yielding a plain version string.
 
 # gosu — privilege de-escalation
 ARG GOSU_VERSION=latest
@@ -184,20 +198,10 @@ RUN ARCH=$(case "${TARGETARCH}" in amd64) echo "x86_64" ;; arm64) echo "aarch64"
     rm -rf /tmp/uv-* && \
     uv --version
 
-# ── Optional: MemPalace — local-first AI memory system ───────────────
+# ── MemPalace — local-first AI memory system ─────────────────────────
 # Provides semantic search over conversation history via 29 MCP tools.
-# Palace data persists via the devbox-palace named volume.
-# The embedding model (~300 MB) is downloaded on first use and cached
-# in the palace directory.
-#
-# Installed via `uv tool install` into an isolated venv at
-# /opt/uv-tools/mempalace/. The `mempalace` CLI goes directly on PATH;
-# the MCP server is reached via the /usr/local/bin/mempalace-mcp-server
-# wrapper (rootfs/usr/local/bin/mempalace-mcp-server), since system
-# python3 cannot import from the isolated venv.
-#
-# Disable with --build-arg INSTALL_MEMPALACE=false to shave ~300 MB off
-# the image (chromadb, torch-adjacent deps).
+# Always installed in the base (variant-independent). Set
+# INSTALL_MEMPALACE=false at base-build time to shave ~300 MB.
 ARG INSTALL_MEMPALACE=true
 ENV UV_TOOL_DIR=/opt/uv-tools
 ENV UV_TOOL_BIN_DIR=/usr/local/bin
@@ -208,17 +212,6 @@ RUN if [ "${INSTALL_MEMPALACE}" = "true" ]; then \
     fi
 
 # ── mempalace-toolkit — bash wrappers for session/docs mining ────────
-# Thin wrappers (`mempalace-session`, `mempalace-docs`) that delegate to
-# the mempalace Python CLI for two common scheduled tasks:
-#   - mempalace-session: mines opencode's SQLite session history into
-#     the palace (wing_conversations). Referenced by contrib/ scheduler
-#     templates (systemd user timer, cron) in the toolkit repo.
-#   - mempalace-docs: mines project docs into a per-project wing.
-# Repo source of truth: https://gitea.jordbo.se/joakimp/mempalace-toolkit
-#
-# Requires INSTALL_MEMPALACE=true (wrappers shell out to `mempalace`).
-# Disable with --build-arg INSTALL_MEMPALACE_TOOLKIT=false if you don't
-# use the scheduled-mining workflow.
 ARG INSTALL_MEMPALACE_TOOLKIT=true
 ARG MEMPALACE_TOOLKIT_REF=main
 RUN if [ "${INSTALL_MEMPALACE}" = "true" ] && [ "${INSTALL_MEMPALACE_TOOLKIT}" = "true" ]; then \
@@ -232,15 +225,12 @@ RUN if [ "${INSTALL_MEMPALACE}" = "true" ] && [ "${INSTALL_MEMPALACE_TOOLKIT}" =
       echo "mempalace-toolkit installed at $(cd /opt/mempalace-toolkit && git rev-parse --short HEAD)" ; \
     fi
 
-# rustup — Rust toolchain manager
-# Installs the rustup-init binary only. Users bootstrap Rust with:
-#   rustup-init -y && source ~/.cargo/env
-# Toolchains persist via devbox-rustup and devbox-cargo volumes.
+# rustup — Rust toolchain manager (init binary only; toolchains installed at runtime)
 RUN ARCH=$(case "${TARGETARCH}" in amd64) echo "x86_64" ;; arm64) echo "aarch64" ;; *) echo "x86_64" ;; esac) && \
     curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://static.rust-lang.org/rustup/dist/${ARCH}-unknown-linux-gnu/rustup-init" -o /usr/local/bin/rustup-init && \
     chmod +x /usr/local/bin/rustup-init
 
-# gitea-mcp — MCP server for Gitea API (official, Go binary, hosted on gitea.com)
+# gitea-mcp — MCP server for Gitea API
 ARG GITEA_MCP_VERSION=latest
 RUN ARCH=$(case "${TARGETARCH}" in amd64) echo "x86_64" ;; arm64) echo "arm64" ;; *) echo "x86_64" ;; esac) && \
     V="${GITEA_MCP_VERSION}" && \
@@ -256,7 +246,6 @@ RUN ARCH=$(case "${TARGETARCH}" in amd64) echo "x86_64" ;; arm64) echo "arm64" ;
     gitea-mcp --version
 
 # Set locale — generate common UTF-8 locales (override via LANG/LC_ALL env vars)
-# To add more locales, run: sudo sed -i '/<locale>.UTF-8/s/^# //g' /etc/locale.gen && sudo locale-gen
 RUN sed -i -E '/(en_US|en_GB|sv_SE|da_DK|nb_NO|fi_FI|de_DE|fr_FR|es_ES|it_IT|pt_BR|nl_NL|pl_PL|ja_JP|ko_KR|zh_CN)\.UTF-8/s/^# //g' /etc/locale.gen && locale-gen
 ENV LANG=en_US.UTF-8
 ENV LANGUAGE=en_US:en
@@ -264,17 +253,12 @@ ENV LC_ALL=en_US.UTF-8
 ENV EDITOR=nvim
 ENV PATH="/home/developer/.local/bin:/home/developer/.cargo/bin:${PATH}"
 
-# ── Node.js (required for opencode v1.x install + MCP servers) ──────
+# ── Node.js (required for opencode/pi/omos at variant build + MCP servers) ──
 ARG NODE_VERSION=22
 RUN curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors https://deb.nodesource.com/setup_${NODE_VERSION}.x | bash - && \
     apt-get install -y --no-install-recommends nodejs && \
     rm -rf /var/lib/apt/lists/*
 
-# ── Install opencode via npm ─────────────────────────────────────────
-# v1.x is distributed as an npm package with platform-specific binaries
-RUN npm install -g opencode-ai@${OPENCODE_VERSION} && \
-    opencode --version
-
 # ── AWS CLI v2 (for SSO/Bedrock authentication) ─────────────────────
 RUN ARCH=$(case "${TARGETARCH}" in \
       amd64) echo "x86_64" ;; \
@@ -287,51 +271,6 @@ RUN ARCH=$(case "${TARGETARCH}" in \
     rm -rf /tmp/aws /tmp/awscli.zip && \
      aws --version
 
-# ── Optional: Go ─────────────────────────────────────────────────────
-# Latest stable Go is resolved from https://go.dev/dl/?mode=json when
-# GO_VERSION=latest (default). Pass an explicit version like "1.26.2"
-# to pin.
-ARG INSTALL_GO=false
-ARG GO_VERSION=latest
-RUN if [ "${INSTALL_GO}" = "true" ]; then \
-      GOARCH=$(case "${TARGETARCH}" in amd64) echo "amd64" ;; arm64) echo "arm64" ;; *) echo "amd64" ;; esac) && \
-      V="${GO_VERSION}" && \
-      if [ "$V" = "latest" ]; then \
-        V=$(curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://go.dev/dl/?mode=json" | \
-            awk -F'"' '/"version":/ { sub(/^go/,"",$4); print $4; exit }'); \
-      fi && \
-      [ -n "$V" ] && \
-      echo "Installing Go ${V}" && \
-      curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://go.dev/dl/go${V}.linux-${GOARCH}.tar.gz" | tar -C /usr/local -xz && \
-      ln -s /usr/local/go/bin/go /usr/local/bin/go && \
-      ln -s /usr/local/go/bin/gofmt /usr/local/bin/gofmt; \
-    fi
-
-# ── Optional: oh-my-opencode-slim (multi-agent orchestration) ────────
-# Installs Bun runtime and the oh-my-opencode-slim npm package.
-# Runtime activation is controlled by ENABLE_OMOS env var in entrypoint.
-# Uses the baseline Bun build (SSE4.2 only) for compatibility with older
-# CPUs that lack AVX2 (e.g. Sandy Bridge on OpenStack).
-ARG INSTALL_OMOS=false
-ARG OMOS_VERSION=latest
-RUN if [ "${INSTALL_OMOS}" = "true" ]; then \
-      ARCH=$(uname -m) && \
-      if [ "$ARCH" = "x86_64" ]; then \
-        BUN_ARCH="x64-baseline"; \
-      elif [ "$ARCH" = "aarch64" ]; then \
-        BUN_ARCH="aarch64"; \
-      fi && \
-      curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://github.com/oven-sh/bun/releases/latest/download/bun-linux-${BUN_ARCH}.zip" -o /tmp/bun.zip && \
-      unzip -o /tmp/bun.zip -d /tmp/bun && \
-      mv /tmp/bun/bun-linux-${BUN_ARCH}/bun /usr/local/bin/bun && \
-      chmod +x /usr/local/bin/bun && \
-      ln -sf bun /usr/local/bin/bunx && \
-      rm -rf /tmp/bun /tmp/bun.zip && \
-      bun --version && \
-      test -L /usr/local/bin/bunx && \
-      npm install -g oh-my-opencode-slim@${OMOS_VERSION}; \
-    fi
-
 # ── Non-root user ────────────────────────────────────────────────────
 ARG USER_NAME=developer
 ARG USER_UID=1000
@@ -344,21 +283,42 @@ RUN groupadd --gid ${USER_GID} ${USER_NAME} && \
 # Create standard directories
 RUN mkdir -p /workspace \
     /home/${USER_NAME}/.config/opencode/skills \
+    /home/${USER_NAME}/.pi/agent/extensions \
     /home/${USER_NAME}/.agents/skills \
     /home/${USER_NAME}/.local/share/opencode \
     /home/${USER_NAME}/.cache/bash \
     /home/${USER_NAME}/.ssh && \
     chown -R ${USER_NAME}:${USER_NAME} /workspace /home/${USER_NAME}
 
+# ── Pre-warm chromadb embedding model ──────────────────────────────
+# Runs as gosu developer so Path.home() resolves correctly. Uses
+# the mempalace venv's python, which is the only one that has
+# chromadb importable (system python3 cannot reach the isolated venv).
+RUN if [ "${INSTALL_MEMPALACE}" = "true" ]; then \
+      gosu ${USER_NAME} /opt/uv-tools/mempalace/bin/python -c "\
+from chromadb.utils.embedding_functions import ONNXMiniLM_L6_V2; \
+ef = ONNXMiniLM_L6_V2(); \
+_ = ef(['warmup']); \
+print('chromadb embedding model warmed: all-MiniLM-L6-v2')" && \
+      ls -lh /home/${USER_NAME}/.cache/chroma/onnx_models/all-MiniLM-L6-v2/ ; \
+    fi
+
+# ── User-writable npm global prefix on the devbox-pi-config volume ──
+# By default npm's global prefix is /usr (writable only by root) so any
+# `pi install npm:<pkg>` or `npm install -g <pkg>` invoked by the
+# developer user would EACCES. Pointing the prefix into ~/.pi places
+# user-installed packages on the named volume, which means they survive
+# container recreation AND image rebuilds.
+#
+# IMPORTANT: in this split-build layout the variant Dockerfile inherits
+# this prefix at build time. To keep the baked binaries on /usr (so the
+# ~/.pi volume mount doesn't shadow them), the variant Dockerfile MUST
+# run each `npm install -g` with NPM_CONFIG_PREFIX=/usr in the per-RUN
+# environment. See Dockerfile.variant.
+ENV NPM_CONFIG_PREFIX=/home/${USER_NAME}/.pi/npm-global
+ENV PATH="/home/${USER_NAME}/.pi/npm-global/bin:${PATH}"
+
 # ── Shell defaults (bash history, aliases, readline) ─────────────────
-# Shipped under /etc/skel-devbox/ rather than copied directly to the
-# user's home. The entrypoint copies them to /home/developer/ only if
-# the target file does not already exist, so host bind-mounts and
-# previously-customized files are never overwritten. Users can restore
-# the baked defaults anytime via:
-#   cp /etc/skel-devbox/.bash_aliases ~/.bash_aliases
-# History itself persists via the devbox-shell-history named volume
-# mounted at ~/.cache/bash (HISTFILE points there).
 RUN mkdir -p /etc/skel-devbox
 COPY rootfs/home/developer/.bash_aliases /etc/skel-devbox/.bash_aliases
 COPY rootfs/home/developer/.inputrc      /etc/skel-devbox/.inputrc
@@ -374,4 +334,4 @@ RUN chmod +x /usr/local/bin/entrypoint.sh /usr/local/bin/entrypoint-user.sh \
 WORKDIR /workspace
 
 ENTRYPOINT ["entrypoint.sh"]
-CMD ["opencode"]
+CMD ["bash", "-l"]

Dockerfile.variant

@@ -0,0 +1,112 @@
+# opencode-devbox — variant image
+#
+# FROMs a base-<hash> image produced by Dockerfile.base and adds only
+# the variant-specific tools (opencode, pi, oh-my-opencode-slim, Go).
+#
+# The four published variants are produced from THIS Dockerfile by
+# varying build args:
+#
+#   variant            INSTALL_OPENCODE  INSTALL_OMOS  INSTALL_PI
+#   ─────────────────  ────────────────  ────────────  ──────────
+#   base               true              false         false
+#   omos               true              true          false
+#   with-pi            true              false         true
+#   omos-with-pi       true              true          true
+#
+# Pass `--build-arg BASE_IMAGE=<repo>:base-<hash>` to select the base.
+# The CI workflow computes the base hash from Dockerfile.base + rootfs/
+# + entrypoint*.sh and feeds it in.
+#
+# IMPORTANT: the base image sets NPM_CONFIG_PREFIX to
+# /home/developer/.pi/npm-global so runtime `pi install npm:...` and
+# `npm install -g` by the developer user lands on the named volume.
+# At BUILD time we want the baked binaries on /usr so they survive the
+# volume mount. Each `npm install -g` below therefore prefixes the
+# command with `NPM_CONFIG_PREFIX=/usr`.
+
+ARG BASE_IMAGE
+FROM ${BASE_IMAGE}
+
+ARG TARGETARCH
+ARG USER_NAME=developer
+
+# ── Install opencode via npm ─────────────────────────────────────────
+ARG INSTALL_OPENCODE=true
+ARG OPENCODE_VERSION=1.15.6
+RUN if [ "${INSTALL_OPENCODE}" = "true" ]; then \
+      NPM_CONFIG_PREFIX=/usr npm install -g opencode-ai@${OPENCODE_VERSION} && \
+      opencode --version ; \
+    fi
+
+# ── Optional: pi coding-agent ────────────────────────────────────────
+# pi-toolkit and pi-extensions are cloned into /opt/. entrypoint-user.sh
+# runs each repo's install.sh on container start so symlinks land under
+# ~/.pi/agent/ on the named volume.
+ARG INSTALL_PI=false
+ARG PI_VERSION=latest
+ARG PI_TOOLKIT_REF=main
+ARG PI_EXTENSIONS_REF=main
+RUN if [ "${INSTALL_PI}" = "true" ]; then \
+      set -e && \
+      git_clone_retry() { \
+        url="$1"; ref="$2"; dest="$3"; \
+        for i in 1 2 3 4 5; do \
+          if git clone --depth 1 --branch "$ref" "$url" "$dest"; then return 0; fi; \
+          rm -rf "$dest"; \
+          echo "git clone $url failed (attempt $i/5), retrying in $((i*5))s..."; \
+          sleep $((i*5)); \
+        done; \
+        return 1; \
+      } && \
+      if [ "${PI_VERSION}" = "latest" ]; then \
+        NPM_CONFIG_PREFIX=/usr npm install -g @earendil-works/pi-coding-agent ; \
+      else \
+        NPM_CONFIG_PREFIX=/usr npm install -g @earendil-works/pi-coding-agent@${PI_VERSION} ; \
+      fi && \
+      pi --version && \
+      git_clone_retry https://gitea.jordbo.se/joakimp/pi-toolkit.git "${PI_TOOLKIT_REF}" /opt/pi-toolkit && \
+      git_clone_retry https://gitea.jordbo.se/joakimp/pi-extensions.git "${PI_EXTENSIONS_REF}" /opt/pi-extensions && \
+      echo "pi-toolkit at $(cd /opt/pi-toolkit && git rev-parse --short HEAD)" && \
+      echo "pi-extensions at $(cd /opt/pi-extensions && git rev-parse --short HEAD)" ; \
+    fi
+
+# ── Optional: Go ─────────────────────────────────────────────────────
+ARG INSTALL_GO=false
+ARG GO_VERSION=latest
+RUN if [ "${INSTALL_GO}" = "true" ]; then \
+      GOARCH=$(case "${TARGETARCH}" in amd64) echo "amd64" ;; arm64) echo "arm64" ;; *) echo "amd64" ;; esac) && \
+      V="${GO_VERSION}" && \
+      if [ "$V" = "latest" ]; then \
+        V=$(curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://go.dev/dl/?mode=json" | \
+            awk -F'"' '/"version":/ { sub(/^go/,"",$4); print $4; exit }'); \
+      fi && \
+      [ -n "$V" ] && \
+      echo "Installing Go ${V}" && \
+      curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://go.dev/dl/go${V}.linux-${GOARCH}.tar.gz" | tar -C /usr/local -xz && \
+      ln -s /usr/local/go/bin/go /usr/local/bin/go && \
+      ln -s /usr/local/go/bin/gofmt /usr/local/bin/gofmt; \
+    fi
+
+# ── Optional: oh-my-opencode-slim (multi-agent orchestration) ────────
+# Installs Bun runtime and the oh-my-opencode-slim npm package.
+ARG INSTALL_OMOS=false
+ARG OMOS_VERSION=latest
+RUN if [ "${INSTALL_OMOS}" = "true" ]; then \
+      ARCH=$(uname -m) && \
+      if [ "$ARCH" = "x86_64" ]; then \
+        BUN_ARCH="x64-baseline"; \
+      elif [ "$ARCH" = "aarch64" ]; then \
+        BUN_ARCH="aarch64"; \
+      fi && \
+      curl -fsSL --retry 5 --retry-delay 5 --retry-all-errors "https://github.com/oven-sh/bun/releases/latest/download/bun-linux-${BUN_ARCH}.zip" -o /tmp/bun.zip && \
+      unzip -o /tmp/bun.zip -d /tmp/bun && \
+      mv /tmp/bun/bun-linux-${BUN_ARCH}/bun /usr/local/bin/bun && \
+      chmod +x /usr/local/bin/bun && \
+      ln -sf bun /usr/local/bin/bunx && \
+      rm -rf /tmp/bun /tmp/bun.zip && \
+      bun --version && \
+      test -L /usr/local/bin/bunx && \
+      NPM_CONFIG_PREFIX=/usr npm install -g oh-my-opencode-slim@${OMOS_VERSION}; \
+    fi
+
+# WORKDIR / ENTRYPOINT / CMD inherited from base.

README.md

@@ -8,8 +8,28 @@ The official `ghcr.io/anomalyco/opencode` image (now archived) was Alpine-based
 
 ## Quick Start
 
+**Just want to run it?** No git clone needed — grab the two template files:
+
+```bash
+mkdir -p ~/opencode-devbox && cd ~/opencode-devbox
+
+# Pull docker-compose.yml and the .env template
+curl -O https://gitea.jordbo.se/joakimp/opencode-devbox/raw/branch/main/docker-compose.yml
+curl -fsSL https://gitea.jordbo.se/joakimp/opencode-devbox/raw/branch/main/.env.example -o .env
+
+# Edit .env — at minimum: OPENCODE_PROVIDER, the matching API key,
+# WORKSPACE_PATH, GIT_USER_NAME, GIT_USER_EMAIL.
+$EDITOR .env
+
+# Pull and run
+docker compose run --rm devbox
+```
+
+This pulls `joakimp/opencode-devbox:latest` from Docker Hub, mounts `WORKSPACE_PATH` at `/workspace`, and drops you straight into opencode. Use `bash` instead of (no command) to land in a shell first — useful for `aws sso login`, `pi`, `omos`, etc.
+
+**Want to hack on the image itself, follow upstream changes, or rebuild from source?** Clone the repo:
+
 ```bash
-# Clone
 git clone ssh://gitea.jordbo.se:2222/joakimp/opencode-devbox.git
 cd opencode-devbox
 
@@ -17,7 +37,7 @@ cd opencode-devbox
 cp .env.example .env
 # Edit .env with your provider, API key, workspace path, git config
 
-# Install git hooks (secret scanning)
+# Install git hooks (secret scanning) before committing
 brew install gitleaks  # macOS / Linuxbrew
 ./setup-hooks.sh
 
@@ -341,6 +361,10 @@ docker compose build --build-arg NVIM_VERSION=0.12.1   # pin to a specific versi
 | `INSTALL_MEMPALACE` | `true` | [MemPalace](https://github.com/MemPalace/mempalace) local AI memory system (~300 MB — disable to shrink image if you don't need MCP memory) |
 | `INSTALL_MEMPALACE_TOOLKIT` | `true` | [mempalace-toolkit](https://gitea.jordbo.se/joakimp/mempalace-toolkit) bash wrappers (`mempalace-session`, `mempalace-docs`). Cloned at build time from `MEMPALACE_TOOLKIT_REF` (default `main`). Requires `INSTALL_MEMPALACE=true`. |
 | `INSTALL_OMOS` | `false` | [oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim) multi-agent orchestration (installs Bun and plugin) |
+| `INSTALL_OPENCODE` | `true` | Install opencode. Set `false` to build a pi-only image (still includes Bun if `INSTALL_OMOS=true`; for a fully stripped pi-only image see the `pi-devbox` repo). |
+| `INSTALL_PI` | `false` | Install [pi](https://github.com/earendil-works/pi) as alternative/complementary harness. Both clones [pi-toolkit](https://gitea.jordbo.se/joakimp/pi-toolkit) (~5 MB) and [pi-extensions](https://gitea.jordbo.se/joakimp/pi-extensions) (~1 MB) into `/opt/`; entrypoint deploys them on container start. ~150 MB total image growth. |
+| `PI_VERSION` | `latest` | npm version of `@earendil-works/pi-coding-agent`. Floats by default (image rebuild = pi update). |
+| `PI_TOOLKIT_REF`, `PI_EXTENSIONS_REF` | `main` | Git refs for the toolkit/extensions clones. Pin to a tag/commit for reproducibility. |
 | `OPENCODE_VERSION` | *(pinned per release)* | opencode npm version. Drives the image tag and is intentionally not floated. |
 | `NODE_VERSION` | `22` | Node.js major version. Pinned to protect against upstream breaking changes across majors. |
 | `GOSU_VERSION`, `FZF_VERSION`, `GIT_LFS_VERSION`, `NVIM_VERSION`, `BAT_VERSION`, `EZA_VERSION`, `ZOXIDE_VERSION`, `UV_VERSION`, `GITEA_MCP_VERSION`, `GO_VERSION`, `OMOS_VERSION` | `latest` | All GitHub/Gitea/go.dev-hosted binaries resolve to the newest upstream release at build time. Override with a specific version to pin. Resolved versions are logged in CI output. |
@@ -402,6 +426,79 @@ ping all agents
 
 All six agents should respond if your provider authentication is working.
 
+## pi (alternative/complementary harness)
+
+[pi](https://github.com/earendil-works/pi) is a lightweight TUI coding-agent that can run alongside opencode in the same container. Both harnesses share the mempalace install and palace data — wing/diary entries created by one are visible to the other.
+
+### Setup
+
+Pre-built pi-enabled images are available on Docker Hub as `joakimp/opencode-devbox:latest-with-pi` (base + pi) and `joakimp/opencode-devbox:latest-omos-with-pi` (OMOS + pi). Pulling one of those tags is the fastest path. Alternatively, build from source:
+
+### Build
+
+```bash
+docker compose build --build-arg INSTALL_PI=true
+# Or: pin a pi version
+docker compose build --build-arg INSTALL_PI=true --build-arg PI_VERSION=0.73.0
+# Or: pi-only image (no opencode, smaller)
+docker compose build --build-arg INSTALL_PI=true --build-arg INSTALL_OPENCODE=false
+```
+
+### Run
+
+The default `compose run --rm devbox` invocation drops to a login bash so you can choose:
+
+```bash
+docker compose run --rm devbox       # bash, then `pi` or `opencode` or `aws sso login`
+docker compose run --rm devbox pi     # launch pi directly
+docker compose run --rm devbox opencode
+```
+
+For an attached `compose up -d` container, both harnesses are reachable via `compose exec`:
+
+```bash
+docker compose exec -u developer devbox pi
+docker compose exec -u developer devbox opencode
+docker compose exec -u developer devbox bash
+```
+
+### What gets installed
+
+- **`pi` CLI** — npm-installed globally at build time. Version pinned by `PI_VERSION`.
+- **pi-toolkit** — keybindings.json (mosh/tmux newline fixes), pi-env.zsh (AWS env loader), settings.json template. Cloned to `/opt/pi-toolkit`; deployed to `~/.pi/agent/` on first container start.
+- **pi-extensions** — 7 extensions, cloned to `/opt/pi-extensions` and symlinked into `~/.pi/agent/extensions/`:
+  - `confirm-destructive` — confirm-prompt before dangerous bash commands and session actions.
+  - `ext-toggle` — `/ext` slash command to list and enable/disable extensions at runtime (rename-to-disable; survives `/reload`).
+  - `git-checkpoint` — per-turn `git stash` checkpoint, restorable on `/fork`.
+  - `mcp-loader` — generic MCP server loader. Reads an `mcp` block from `~/.pi/agent/settings.json` (same shape as opencode and Claude Desktop) and connects to each declared server, exposing the tools as native pi tools. Supports both **local stdio** subprocesses (`uvx mcp-searxng`, `gitea-mcp`, …) and **remote streamable-HTTP** servers per MCP spec 2025-03-26 (e.g. `https://mcp.context7.com/mcp`). Adds a `/mcp` slash command for runtime status / toggle (same UX as `/ext`). See [`pi-extensions/AGENTS.md`](https://gitea.jordbo.se/joakimp/pi-extensions/src/branch/main/AGENTS.md) for transport details and the `headers` config for auth tokens.
+  - `notify` — native terminal notification when the agent finishes.
+  - `ssh-controlmaster` — transparent SSH remote execution via persistent ControlMaster socket (when pi is launched with `--ssh user@host`).
+  - `todo` — `todo` tool for the agent + `/todos` for the user.
+- **mempalace bridge** — separate `mempalace.ts` extension symlinked from the cloned `mempalace-toolkit`. Provides pi's MCP tools for palace search/diary/knowledge-graph with bespoke agent-identity injection from `$MEMPALACE_AGENT_NAME`. Coexists with `mcp-loader` rather than replacing it — don't list `mempalace` in settings.json's `mcp` block too, or you'll get duplicate tool registrations.
+- **MCP servers (none baked in beyond mempalace)** — the loader registers nothing by default. Add servers by editing `~/.pi/agent/settings.json` and `/reload`. Examples (mcp-searxng for web search, context7 for live library docs) are in the `pi-extensions` README.
+
+### Persistence
+
+`~/.pi/` is mounted on the `devbox-pi-config` named volume. Everything below survives container recreate **and** image rebuilds:
+
+- `~/.pi/agent/settings.json` (provider/model, theme selection, the `mcp` block, and the `packages` array tracking installed pi packages).
+- `~/.pi/agent/extensions/` (hand-placed extensions and the symlinks deployed by `pi-extensions/install.sh`).
+- `~/.pi/agent/sessions/`, `~/.pi/agent/auth.json`.
+- `~/.pi/agent/git/<host>/<path>/` (pi packages installed via `pi install git:...`).
+- `~/.pi/npm-global/` (pi packages installed via `pi install npm:...`, plus any `npm install -g` invoked as the `developer` user). `NPM_CONFIG_PREFIX` is pre-set in the image, the prefix's `bin/` is on `PATH`, and the directory itself lives on the volume — so user-installed themes, skills, and extensions survive everything short of `docker compose down -v`.
+
+The **baked** pi binary (and pi-toolkit / pi-extensions repos under `/opt/`) live on the image filesystem, not the volume. Image rebuild is the upgrade path for those — same contract as `OPENCODE_VERSION`. If you `npm install -g @earendil-works/pi-coding-agent` yourself, the user-installed copy on the volume wins via `PATH` order and survives image rebuilds.
+
+### Configuration
+
+The entrypoint copies `pi-toolkit/settings.example.json` to `~/.pi/agent/settings.json` on first start. Edit it to set provider/model:
+
+```bash
+docker compose exec -u developer devbox $EDITOR ~/.pi/agent/settings.json
+```
+
+The AWS env loader (`pi-env.zsh`) reads `~/.config/pi/.env` if you bind-mount one; otherwise pi uses container env vars passed via `.env`.
+
 ## AWS Bedrock Authentication
 
 When using AWS Bedrock as your LLM provider, you need:

docker-compose.yml

@@ -25,6 +25,9 @@ services:
     #   args:
     #     INSTALL_GO: "false"
     #     INSTALL_OMOS: "false"
+    #     INSTALL_PI: "false"
+    #     # PI_VERSION: "latest"
+    #     # INSTALL_OPENCODE: "true"
     container_name: opencode-devbox
     stdin_open: true
     tty: true
@@ -55,6 +58,7 @@ services:
       # the container's skill/instruction symlinks independent from the host,
       # allowing both native and containerized opencode on the same machine.
       - devbox-opencode-config:/home/developer/.config/opencode
+      - devbox-pi-config:/home/developer/.pi
 
       # NOTE: Do NOT bind-mount ~/.agents/skills/ from the host. The
       # container manages its own skills directory independently — the
@@ -121,6 +125,7 @@ services:
 
 volumes:
   devbox-opencode-config:
+  devbox-pi-config:
   devbox-data:
   devbox-state:
   devbox-shell-history:

entrypoint-user.sh

@@ -25,7 +25,12 @@ if command -v mempalace &>/dev/null && [ -d /workspace ]; then
   PALACE_DIR="${HOME}/.mempalace"
   if [ ! -d "$PALACE_DIR/palace" ]; then
     echo "Initializing MemPalace for workspace (non-interactive)..."
-    mempalace init --yes /workspace >/dev/null 2>&1 || true
+    # </dev/null: mempalace init has an interactive "Mine this directory
+    # now? [Y/n]" prompt that --yes does not auto-answer in all paths.
+    # Without redirected stdin, the process blocks here forever when run
+    # from `docker run -it` (the TTY keeps stdin open). EOF on stdin
+    # makes the prompt fall through to its default (skip).
+    mempalace init --yes /workspace </dev/null >/dev/null 2>&1 || true
   fi
 fi
 
@@ -44,6 +49,44 @@ fi
 # generated) and no-ops if OPENCODE_PROVIDER is unset.
 python3 /usr/local/lib/opencode-devbox/generate-config.py
 
+# ── pi: deploy toolkit + extensions + mempalace bridge ─────────────
+# Runs only when pi was baked into the image (INSTALL_PI=true at build).
+# Each install.sh is idempotent and backs up real files before linking,
+# so re-running across container restarts is safe.
+#
+# Order: pi-toolkit first (creates ~/.pi/agent/keybindings.json symlink
+# and writes the AWS env loader), then pi-extensions (symlinks our 6
+# extensions), then settings.json bootstrap from the toolkit template,
+# then the mempalace bridge symlink (one-liner; mempalace-toolkit's
+# install_skill is intentionally skipped to avoid racing with skillset
+# auto-deploy below).
+if command -v pi &>/dev/null; then
+  if [ -d /opt/pi-toolkit ]; then
+    (cd /opt/pi-toolkit && ./install.sh --yes) || \
+      echo "WARN: pi-toolkit install.sh failed (continuing)"
+  fi
+
+  if [ -d /opt/pi-extensions ]; then
+    (cd /opt/pi-extensions && ./install.sh --yes) || \
+      echo "WARN: pi-extensions install.sh failed (continuing)"
+  fi
+
+  # Bootstrap settings.json from template if absent (pi rewrites this
+  # file at runtime — lastChangelogVersion, etc — so we can't symlink it).
+  if [ ! -f "$HOME/.pi/agent/settings.json" ] && \
+     [ -f /opt/pi-toolkit/settings.example.json ]; then
+    cp /opt/pi-toolkit/settings.example.json "$HOME/.pi/agent/settings.json"
+  fi
+
+  # pi↔mempalace MCP bridge — single extension symlink.
+  if [ -f /opt/mempalace-toolkit/extensions/pi/mempalace.ts ] && \
+     command -v mempalace &>/dev/null && \
+     [ ! -L "$HOME/.pi/agent/extensions/mempalace.ts" ]; then
+    ln -sf /opt/mempalace-toolkit/extensions/pi/mempalace.ts \
+           "$HOME/.pi/agent/extensions/mempalace.ts"
+  fi
+fi
+
 # ── Skillset: deploy skills/instructions from mounted skillset repo ──
 # When the skillset repo is mounted (at $HOME/skillset or /workspace/skillset),
 # run the deploy script to create relative symlinks for skills and instructions.

entrypoint.sh

@@ -87,6 +87,7 @@ for dir in \
   /home/"$USER_NAME"/.vscode-server \
   /home/"$USER_NAME"/.config/opencode \
   /home/"$USER_NAME"/.config/nvim \
+  /home/"$USER_NAME"/.pi \
   /home/"$USER_NAME"/.agents/skills; do
   [ -d "$dir" ] || continue
 

scripts/generate-dockerhub-md.py

@@ -1,15 +1,30 @@
 #!/usr/bin/env python3
 """
-Generate DOCKER_HUB.md from README.md.
+Generate DOCKER_HUB.md.
 
 Rationale
 ---------
-README.md is the authoritative source. DOCKER_HUB.md is a subset
-intended for users pulling the pre-built image from Docker Hub — so
-build-from-source instructions, developer setup (git hooks, gitleaks),
-and CI/contribution content are dropped.
+DOCKER_HUB.md is the public-facing description shown on Docker Hub. It
+has two hard constraints the README does not:
 
-Docker Hub enforces a 25 kB limit on the full description field.
+  1. A 25 kB byte limit on the full_description field.
+  2. A different audience: Hub readers want a 30-second evaluation —
+     "what is this, how do I run it, does it have what I need" — and
+     reference material is better consulted in context on gitea.
+
+For a long time this script tried to derive DOCKER_HUB.md from README.md
+by section selection + targeted replacement. As the README grew that
+approach pushed against the 25 kB ceiling on every change, costing a
+trim-something-else exercise per edit (final state: 3 byte headroom).
+
+The new approach is much simpler: a hand-written HUB_TEMPLATE below.
+The template intentionally stays slim and links out to the gitea README
+for everything that benefits from depth. README.md grows freely.
+
+Trade-off: when image-variants table or quick-start flow changes,
+update HUB_TEMPLATE here too. That coupling is now explicit and
+local rather than spread across SECTION_RULES + REPLACEMENTS + TRIM
+machinery.
 
 Usage
 -----
@@ -19,76 +34,57 @@ Regenerate in place:
 Fail if DOCKER_HUB.md is out of sync with what this script would emit
 (run this in CI):
     python3 scripts/generate-dockerhub-md.py --check
-
-Design
-------
-Sections are selected and in some cases rewritten via `SECTION_RULES`
-below. This keeps the transformation explicit and easy to audit — if
-a new section is added to README.md that should also appear on Docker
-Hub, extend SECTION_RULES rather than inventing implicit heuristics.
 """
 
 from __future__ import annotations
 
 import argparse
-import re
 import sys
 from pathlib import Path
 
 REPO_ROOT = Path(__file__).resolve().parent.parent
-README = REPO_ROOT / "README.md"
 DOCKER_HUB = REPO_ROOT / "DOCKER_HUB.md"
 
 # Max size for Docker Hub full_description (bytes, UTF-8).
 MAX_SIZE_BYTES = 25_000
 
-# Per-section transformation.
-#
-# Each key is a top-level section title as it appears in README.md
-# (without the leading "## ").
-#
-# The value is one of:
-#   "keep"      — include verbatim.
-#   "drop"      — exclude entirely.
-#   "replace"   — substitute a custom body (see REPLACEMENTS).
-#   "trim"      — keep but drop selected level-3 sub-sections listed
-#                 in TRIM_SUBSECTIONS[title].
-#
-# Unknown sections default to "drop" with a warning — forcing an
-# explicit decision whenever README gains a new section.
-SECTION_RULES: dict[str, str] = {
-    "Why?": "drop",                             # build-motivation, not user-facing
-    "Quick Start": "replace",                   # swap docker compose clone flow for docker run
-    "Features": "keep",
-    "Usage": "keep",
-    "Configuration": "trim",                    # drop dev-build sub-sections
-    "oh-my-opencode-slim (Multi-Agent Orchestration)": "keep",
-    "AWS Bedrock Authentication": "keep",
-    "MemPalace — persistent AI memory": "keep",
-    "Gitea MCP server": "keep",
-    "Context7 MCP server": "drop",
-    "Shell defaults": "drop",                   # detail, full README covers it
-    "Secret Scanning": "drop",                  # dev-only — gitleaks is for committers
-    "Architecture": "keep",
-    "License": "replace",                       # point at source repo instead
-}
+# Where readers go for the full reference.
+GITEA = "https://gitea.jordbo.se/joakimp/opencode-devbox"
 
-# Level-3 sub-section titles (without the leading "### ") to drop from
-# sections flagged as "trim". These are dev/build-oriented — Docker Hub
-# users already have the image and don't need rebuild or multi-user
-# compose instructions.
-TRIM_SUBSECTIONS: dict[str, set[str]] = {
-    "Configuration": {
-        "Multi-user setup",
-        "Rebuilding the Image",
-        "Build Args",
-    },
-}
 
-# Replacement bodies. Keys match SECTION_RULES entries marked "replace".
-# Each value is the full section including the "## Title" heading.
-REPLACEMENTS: dict[str, str] = {
-    "Quick Start": """## Quick Start
+HUB_TEMPLATE = f"""# opencode-devbox
+
+Portable AI developer environment for [opencode](https://opencode.ai). Debian-based, with git, SSH, Node.js, AWS CLI v2, and common dev tools pre-installed.
+
+Designed for teams who want a reproducible coding-agent setup that runs the same on every laptop and CI runner — without forcing each developer to install Bun, Node, AWS CLI, mempalace, or maintain shell config drift across machines.
+
+## Image Variants
+
+| Tag | Description |
+|---|---|
+| `latest` / `vX.Y.Z` | Base image — opencode, Node.js, AWS CLI, dev tools |
+| `latest-omos` / `vX.Y.Z-omos` | Base + [oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim) multi-agent orchestration and Bun |
+| `latest-with-pi` / `vX.Y.Z-with-pi` | Base + [pi](https://github.com/earendil-works/pi) as alternative/complementary harness (shares the mempalace install with opencode) |
+| `latest-omos-with-pi` / `vX.Y.Z-omos-with-pi` | OMOS + pi together |
+
+All variants support `linux/amd64` and `linux/arm64`.
+
+## Quick Start
+
+For a fully-configured environment with persistent state (opencode config, mempalace memory, neovim plugins, bash history) surviving container recreation, use docker-compose. **You don't need to clone the repo** — just grab two template files:
+
+```bash
+mkdir -p ~/opencode-devbox && cd ~/opencode-devbox
+curl -O https://gitea.jordbo.se/joakimp/opencode-devbox/raw/branch/main/docker-compose.yml
+curl -fsSL https://gitea.jordbo.se/joakimp/opencode-devbox/raw/branch/main/.env.example -o .env
+# Edit .env — set OPENCODE_PROVIDER, the matching API key,
+# WORKSPACE_PATH, GIT_USER_NAME, GIT_USER_EMAIL.
+docker compose run --rm devbox
+```
+
+This drops you straight into opencode with your project mounted at `/workspace`. Use `bash` as the command (e.g. `docker compose run --rm devbox bash`) to land in a shell first — useful for `aws sso login`, `pi` (on `*-with-pi` variants), or multi-harness workflows.
+
+**One-shot run, no persistence:**
 
 ```bash
 docker run -it --rm \\
@@ -101,138 +97,65 @@ docker run -it --rm \\
   joakimp/opencode-devbox:latest
 ```
 
-This drops you straight into opencode with your project mounted at `/workspace`.
+Full setup guide — authentication for each provider (Anthropic, OpenAI, Bedrock SSO + static), persistence model, build args, troubleshooting: <{GITEA}#readme>
 
-For an interactive shell first (useful for AWS SSO login):
+## What's Inside
 
-```bash
-docker run -it --rm \\
-  -e ANTHROPIC_API_KEY=your-key \\
-  -e OPENCODE_PROVIDER=anthropic \\
-  -v ~/projects:/workspace \\
-  -v ~/.ssh:/home/developer/.ssh:ro \\
-  joakimp/opencode-devbox:latest bash
-```
+- **[opencode](https://opencode.ai)** — primary coding-agent harness. Multi-provider (Anthropic, OpenAI, Bedrock, Google, Groq, etc.).
+- **[pi](https://github.com/earendil-works/pi)** *(in `*-with-pi` variants)* — lightweight TUI coding-agent that coexists with opencode and shares the same mempalace install. Includes the `mcp-loader` extension so any local-stdio or remote streamable-HTTP MCP server (searxng, gitea, context7, …) can be added by editing `~/.pi/agent/settings.json`.
+- **[mempalace](https://github.com/MemPalace/mempalace)** — persistent AI memory layer (ChromaDB + SQLite). Wing/diary/knowledge-graph entries are mutually visible to opencode and pi.
+- **[oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim)** *(in `*-omos` variants)* — multi-agent orchestration on top of opencode (council, fallback chains, named agents).
+- **AWS CLI v2** with SSO support, **Node.js LTS**, **Bun** (OMOS variants), **uv** (Python), **gosu** for clean UID/GID adjustment to match your host workspace.
+- **MCP wrappers** for mempalace pre-installed and pre-wired to both harnesses.
 
-Then run `opencode` when ready.
+## Authentication
 
-For docker-compose users, see the source repo for `docker-compose.yml` and `.env.example` templates.
-""",
-    "License": """## Source
+The container reads provider credentials from environment variables and host-mounted config:
 
-MIT licensed. Source, issues, and `docker-compose.yml` templates: <https://gitea.jordbo.se/joakimp/opencode-devbox>
-""",
-}
+- **Anthropic / OpenAI / Groq / others:** set `OPENCODE_PROVIDER` and the corresponding `*_API_KEY` via `-e` or `.env`.
+- **AWS Bedrock (SSO):** mount `~/.aws` from the host, `OPENCODE_PROVIDER=amazon-bedrock`, then `aws sso login` inside the container. Tokens persist across container restarts via the host bind-mount.
+- **OAuth / device-code providers:** auth state lives in opencode's config, which is persisted via the `devbox-opencode-config` named volume.
 
+Full Bedrock walkthrough (IAM roles, permissions, multi-account setups): see the [AWS Bedrock Authentication](
+{GITEA}#aws-bedrock-authentication
+) section on gitea.
 
-# Prepended to the generated file.
-HEADER = """# opencode-devbox — Docker Hub
+## Persistence
 
-Portable AI developer environment for [opencode](https://opencode.ai). Debian-based, with git, SSH, Node.js, AWS CLI v2, and common dev tools pre-installed.
+| Volume | Mount | Survives |
+|---|---|---|
+| `devbox-opencode-config` | `~/.config/opencode` | container recreate, image rebuild |
+| `devbox-pi-config` | `~/.pi` | container recreate, image rebuild — incl. user-installed pi packages via `pi install` (`NPM_CONFIG_PREFIX` points into the volume) |
+| `devbox-palace` (uncomment) | `~/.mempalace` | container recreate, image rebuild — palace data is precious, treat as primary storage |
+| `devbox-chroma-cache` | `~/.cache/chroma` | container recreate (model cache, disposable — re-downloads in seconds) |
 
-## Image Variants
+Workspace bind-mount (`/workspace`) is your project directory on the host, so source code is never inside the container.
 
-Two image variants are published for each release:
+Full persistence reference, including multi-user (`SIGNUM`) isolation and host bind-mount alternatives: see the [README on gitea]({GITEA}#persistence).
 
-| Tag | Description |
-|---|---|
-| `latest` / `vX.Y.Z` | Base image — opencode, Node.js, AWS CLI, dev tools |
-| `latest-omos` / `vX.Y.Z-omos` | Base + [oh-my-opencode-slim](https://github.com/alvinunreal/oh-my-opencode-slim) multi-agent orchestration and Bun |
+## Where to Go Next
 
-Both variants support `linux/amd64` and `linux/arm64`.
+- **Full README** with build args, every feature in detail, troubleshooting: <{GITEA}>
+- **CHANGELOG** for version history: <{GITEA}/src/branch/main/CHANGELOG.md>
+- **Issues / source / docker-compose templates:** <{GITEA}>
+- **Agent-facing internals** (for future maintainers / coding agents working in the repo): <{GITEA}/src/branch/main/AGENTS.md>
 
-> **NOTE:** This file is auto-generated from `README.md` by `scripts/generate-dockerhub-md.py`. Edit README.md and regenerate rather than editing this file directly.
+## Sibling images
 
+- **[`joakimp/pi-devbox`](https://hub.docker.com/r/joakimp/pi-devbox)** — pi-only image built on top of this image's base layer. Smaller (~700 MB) and version-tracks the [pi npm package](https://www.npmjs.com/package/@earendil-works/pi-coding-agent) directly. Use this if you want pi without opencode. Source: <https://gitea.jordbo.se/joakimp/pi-devbox>
+
+## License
+
+MIT. See <{GITEA}/src/branch/main/LICENSE>.
+
+---
+
+> This description is generated by `scripts/generate-dockerhub-md.py` from a hand-maintained template. Edit the template (not this file) and regenerate.
 """
 
 
-def split_sections(md: str) -> list[tuple[str, str]]:
-    """Split markdown on level-2 headings, returning (title, body) pairs.
-
-    The body includes the heading line and everything up to (but not
-    including) the next level-2 heading or EOF. Content before the first
-    ``## `` is returned with an empty title (the document preamble).
-    """
-    pattern = re.compile(r"^## ", re.MULTILINE)
-    parts = pattern.split(md)
-    preamble, *rest = parts
-
-    sections: list[tuple[str, str]] = []
-    if preamble.strip():
-        sections.append(("", preamble))
-    for part in rest:
-        line, _, body = part.partition("\n")
-        sections.append((line.strip(), f"## {line}\n{body}"))
-    return sections
-
-
-def trim_subsections(body: str, drop: set[str]) -> str:
-    """Remove level-3 sub-sections whose title is in `drop`.
-
-    A sub-section starts at a line beginning with "### " and ends at
-    the next "### " or "## " (or EOF).
-    """
-    if not drop:
-        return body
-
-    # Split on level-3 headings while preserving the level-2 header
-    # block. First piece is everything up to the first "### ".
-    parts = re.split(r"(^### .+\n)", body, flags=re.MULTILINE)
-    # parts alternates: [before_first_h3, "### Title\n", body, "### Title\n", body, ...]
-    kept: list[str] = [parts[0]] if parts else []
-    i = 1
-    while i < len(parts):
-        heading = parts[i]
-        content = parts[i + 1] if i + 1 < len(parts) else ""
-        title = heading[4:].strip()
-        if title not in drop:
-            kept.append(heading)
-            kept.append(content)
-        i += 2
-    return "".join(kept)
-
-
 def generate() -> str:
-    """Produce the DOCKER_HUB.md content string."""
-    readme = README.read_text(encoding="utf-8")
-    sections = split_sections(readme)
-
-    out: list[str] = [HEADER]
-    unknown: list[str] = []
-
-    for title, body in sections:
-        if title == "":
-            # README preamble is replaced by our HEADER; skip.
-            continue
-
-        rule = SECTION_RULES.get(title)
-        if rule is None:
-            unknown.append(title)
-            continue
-        if rule == "drop":
-            continue
-        if rule == "keep":
-            out.append(body.rstrip() + "\n\n")
-        elif rule == "trim":
-            trimmed = trim_subsections(body, TRIM_SUBSECTIONS.get(title, set()))
-            out.append(trimmed.rstrip() + "\n\n")
-        elif rule == "replace":
-            out.append(REPLACEMENTS[title].rstrip() + "\n\n")
-        else:  # pragma: no cover — programmer error
-            raise AssertionError(f"unknown rule {rule!r} for section {title!r}")
-
-    if unknown:
-        print(
-            "ERROR: README.md contains sections not classified in "
-            "SECTION_RULES:\n  - "
-            + "\n  - ".join(unknown)
-            + "\n\nAdd each to SECTION_RULES in "
-            "scripts/generate-dockerhub-md.py (choose keep/drop/replace).",
-            file=sys.stderr,
-        )
-        raise SystemExit(2)
-
-    return "".join(out).rstrip() + "\n"
+    return HUB_TEMPLATE
 
 
 def main() -> int:
@@ -258,11 +181,10 @@ def main() -> int:
         existing = DOCKER_HUB.read_text(encoding="utf-8") if DOCKER_HUB.exists() else ""
         if existing != content:
             print(
-                "ERROR: DOCKER_HUB.md is out of sync with README.md.\n"
+                "ERROR: DOCKER_HUB.md is out of sync with the template.\n"
                 "Run: python3 scripts/generate-dockerhub-md.py",
                 file=sys.stderr,
             )
-            # Show a small diff hint.
             import difflib
 
             diff = difflib.unified_diff(
@@ -275,14 +197,16 @@ def main() -> int:
             sys.stderr.writelines(list(diff)[:80])
             return 1
         print(
-            f"OK: DOCKER_HUB.md is in sync with README.md "
-            f"({size} bytes, {MAX_SIZE_BYTES} limit).",
+            f"OK: DOCKER_HUB.md is in sync with HUB_TEMPLATE "
+            f"({size} bytes, {MAX_SIZE_BYTES} limit, "
+            f"{MAX_SIZE_BYTES - size} bytes headroom).",
         )
         return 0
 
     DOCKER_HUB.write_text(content, encoding="utf-8")
     print(
-        f"Wrote {DOCKER_HUB} ({size} bytes, {MAX_SIZE_BYTES} limit).",
+        f"Wrote {DOCKER_HUB} ({size} bytes, {MAX_SIZE_BYTES} limit, "
+        f"{MAX_SIZE_BYTES - size} bytes headroom).",
     )
     return 0
 

scripts/smoke-test.sh

@@ -8,7 +8,7 @@
 #   - Generated opencode.json has the expected shape
 #   - MCP wrapper works (when mempalace is installed)
 #
-# Usage: ./scripts/smoke-test.sh <image> [--variant base|omos]
+# Usage: ./scripts/smoke-test.sh <image> [--variant base|omos|with-pi|omos-with-pi]
 #
 # Exit codes:
 #   0  all checks passed
@@ -23,7 +23,7 @@ if [ "${2:-}" = "--variant" ]; then
 fi
 
 if [ -z "$IMAGE" ]; then
-  echo "usage: $0 <image> [--variant base|omos]" >&2
+  echo "usage: $0 <image> [--variant base|omos|with-pi|omos-with-pi]" >&2
   exit 2
 fi
 
@@ -50,7 +50,12 @@ echo "-- Resolved component versions --"
 # always record what got baked into this image, even when Dockerfile
 # ARGs default to "latest".
 docker run --rm --entrypoint="" "$IMAGE" sh -c '
-  printf "  %-15s %s\n" "opencode"      "$(opencode --version 2>&1 | head -1)"
+  if command -v opencode >/dev/null 2>&1; then
+    printf "  %-15s %s\n" "opencode"      "$(opencode --version 2>&1 | head -1)"
+  fi
+  if command -v pi >/dev/null 2>&1; then
+    printf "  %-15s %s\n" "pi"            "$(pi --version 2>&1 | head -1)"
+  fi
   printf "  %-15s %s\n" "node"          "$(node --version)"
   printf "  %-15s %s\n" "npm"           "$(npm --version)"
   printf "  %-15s %s\n" "nvim"          "$(nvim --version | head -1)"
@@ -77,7 +82,13 @@ docker run --rm --entrypoint="" "$IMAGE" sh -c '
 '
 echo
 echo "-- Core binaries --"
-run "opencode"          "opencode --version"
+# opencode is gated on INSTALL_OPENCODE=true (default). When absent, the
+# image is a pi-only build (or a pure base — no harness at all).
+if docker run --rm --entrypoint="" "$IMAGE" sh -c "command -v opencode" >/dev/null 2>&1; then
+  run "opencode"          "opencode --version"
+else
+  echo "  - opencode not installed (INSTALL_OPENCODE=false)"
+fi
 run "node"              "node --version"
 run "npm"               "npm --version"
 run "git"               "git --version"
@@ -117,13 +128,70 @@ elif docker run --rm --entrypoint="" "$IMAGE" sh -c "command -v mempalace" >/dev
   echo "  - mempalace-toolkit not installed (INSTALL_MEMPALACE_TOOLKIT=false)"
 fi
 
-# bun: only in the omos variant
-if [ "$VARIANT" = "omos" ]; then
+# pi: present when built with INSTALL_PI=true. Verifies pi itself plus
+# the runtime-deployed pi-toolkit + pi-extensions + mempalace bridge
+# symlinks under ~/.pi/agent/. Note: extension symlinks are created by
+# entrypoint-user.sh on first start, so we test by running the entry
+# point chain (not just `docker run --entrypoint=""`).
+if docker run --rm --entrypoint="" "$IMAGE" sh -c "command -v pi" >/dev/null 2>&1; then
+  run "pi"                       "pi --version"
+  run "pi-toolkit clone"         "test -d /opt/pi-toolkit && git -C /opt/pi-toolkit rev-parse --short HEAD"
+  run "pi-extensions clone"      "test -d /opt/pi-extensions && git -C /opt/pi-extensions rev-parse --short HEAD"
+
+  # Run the full entrypoint as developer to verify install.sh deployment.
+  # Spin up a long-running container so we can `docker exec` into it from
+  # the host — the `run` helper above invokes commands INSIDE the image
+  # and has no docker CLI to nest with.
+  CID=$(docker run -d --rm "$IMAGE" tail -f /dev/null)
+  trap 'docker rm -f "$CID" >/dev/null 2>&1 || true' EXIT
+
+  # Wait for entrypoint-user.sh to finish deploying pi-toolkit + extensions.
+  # Marker: keybindings.json symlink lands once pi-toolkit/install.sh has run.
+  # Up to 30s — omos-with-pi has more setup work than base+pi.
+  for _ in $(seq 1 30); do
+    if docker exec "$CID" test -L /home/developer/.pi/agent/keybindings.json 2>/dev/null; then
+      break
+    fi
+    sleep 1
+  done
+
+  exec_test() {
+    local label="$1"; shift
+    local out
+    if out=$(docker exec -u developer "$CID" sh -c "$*" 2>&1); then
+      pass "$label ($(echo "$out" | head -1))"
+    else
+      fail "$label: $out"
+    fi
+  }
+
+  exec_test "~/.pi/agent/keybindings.json (pi-toolkit)" \
+            'test -L $HOME/.pi/agent/keybindings.json && echo ok'
+  exec_test "~/.pi/agent/extensions/*.ts ≥ 4 (pi-extensions)" \
+            'count=$(ls -1 $HOME/.pi/agent/extensions/*.ts 2>/dev/null | wc -l); [ $count -ge 4 ] && echo "$count extensions"'
+  exec_test "~/.pi/agent/extensions/mempalace.ts (bridge)" \
+            'test -L $HOME/.pi/agent/extensions/mempalace.ts && echo ok'
+  exec_test "~/.pi/agent/settings.json (template bootstrap)" \
+            'test -f $HOME/.pi/agent/settings.json && echo ok'
+
+  docker rm -f "$CID" >/dev/null 2>&1 || true
+  trap - EXIT
+else
+  echo "  - pi not installed (INSTALL_PI=false)"
+fi
+
+# bun: only in the omos and omos-with-pi variants
+if [ "$VARIANT" = "omos" ] || [ "$VARIANT" = "omos-with-pi" ]; then
   run "bun (omos)"            "bun --version"
   run "bunx symlink (omos)"   "test -L /usr/local/bin/bunx && readlink /usr/local/bin/bunx"
   # oh-my-opencode-slim is npm-installed globally (not a bun install);
-  # verify it shows up in the global module list.
-  run "oh-my-opencode-slim"   "npm ls -g --depth=0 2>/dev/null | grep oh-my-opencode-slim"
+  # verify it shows up in the global module list. We must explicitly point
+  # npm at the system prefix (/usr) here: the image's NPM_CONFIG_PREFIX env
+  # is set to /home/developer/.pi/npm-global so user-installed packages
+  # land on the persistent volume — which means a default `npm ls -g`
+  # queries the user prefix and would miss the baked binaries even though
+  # they're correctly on PATH at /usr/bin.
+  run "oh-my-opencode-slim"   "NPM_CONFIG_PREFIX=/usr npm ls -g --depth=0 2>/dev/null | grep oh-my-opencode-slim"
 else
   if docker run --rm --entrypoint="" "$IMAGE" sh -c "command -v bun" >/dev/null 2>&1; then
     fail "bun should NOT be in base image but was found"
@@ -221,12 +289,20 @@ SIZE_BYTES=$(docker image inspect --format='{{.Size}}' "$IMAGE")
 SIZE_MB=$((SIZE_BYTES / 1024 / 1024))
 echo "  Uncompressed size: ${SIZE_MB} MB"
 
-# Thresholds (uncompressed): base 2500 MB, omos 3200 MB. Adjust as image content evolves.
+# Thresholds (uncompressed): base 2500 MB, omos 3300 MB, with-pi adds ~150 MB.
 # omos bumped 3000→3200 on v1.14.31c — mempalace-toolkit bake-in pushed the
+# baseline; bumped 3200→3300 on v1.15.0 — opencode 1.15.0 came in at
+# 3206 MB, leaving zero headroom for routine apt-get upgrade drift.
+# omos-with-pi bumped 3400→3500 on v1.15.0 alongside the omos bump.
+# omos-with-pi bumped 3500→3700 on v1.15.4b — omos+pi compounded as both
+# upstream packages grew (opencode 1.15.0→1.15.4, pi 0.74.0→0.75.3) and
+# the variant landed just over 3500 in v1.15.4's smoke.
 # omos variant to ~3.1 GB. Functional smoke checks all pass; this is a
 # guardrail, not a performance limit.
 THRESHOLD=2500
-[ "$VARIANT" = "omos" ] && THRESHOLD=3200
+[ "$VARIANT" = "omos" ] && THRESHOLD=3300
+[ "$VARIANT" = "with-pi" ] && THRESHOLD=2700
+[ "$VARIANT" = "omos-with-pi" ] && THRESHOLD=3700
 if [ "$SIZE_MB" -gt "$THRESHOLD" ]; then
   fail "image size ${SIZE_MB} MB exceeds threshold ${THRESHOLD} MB for variant=$VARIANT"
 else